Cover Image

Effect of temperature on sintering of PCBN with Ti–Si3N4–AIN–Y2O3 additives

Saved in:

Bibliographic Details
Date:	2021
Main Authors:	Mo Peicheng, Chen Chao, Chen Chuan, Wu Yi, Chen Jiarong, Lin Feng
Format:	Article
Language:	English
Published:	2021
Series:	Superhard Materials
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0001320651
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Research on the structure and properties of high temperature and high pressure composite PCBN tool materials
by: Mo Peicheng, et al.
Published: (2023)

Synthesis of TiC0.5–Al and effect of sintering temperature on mechanical properties of PcBN composites
by: Hu Xixi, et al.
Published: (2023)

Synthesis and performance study of polycrystalline cubic boron nitride using WC–B4C–Al2O3 as the binder
by: Peicheng Mo, et al.
Published: (2022)

Study on PCD tool wear in hard milling of fully-sintered 3Y-TZP ceramics
by: J. Xu, et al.
Published: (2022)

Microstructure and wear properties of Ni–Ni3Si composites prepared by mechanical alloying and hot pressing sintering
by: J. Zhang, et al.
Published: (2020)

Phase composition, microstructure and wear properties of Ni/Ni3Si composites prepared by mechanical alloying
by: Junxi Zhang, et al.
Published: (2021)

Effect of Y addition on the microstructures and mechanical properties of Mg-Gd-Y-Sm-Zr alloys
by: Fu sanling, et al.
Published: (2017)

Free sintering and properties of Si3N4–Y2O3–Al2O3 nanodisperse system
by: O. N. Kajdash
Published: (2011)

Dispersion and their tribological properties of molybdenum nanoparticles with different particle sizes as additive in lubricating oil
by: Tianhua Chen
Published: (2018)

Evaluation of polycrystalline diamond tools in milling of pre-sintered and fully-sintered zirconia ceramics
by: J. Xu, et al.
Published: (2022)

Superhard pcBN tool materials with Ti3SiC2 MAX-phase binder: structure, properties, application
by: T. Kolabylina, et al.
Published: (2017)

Мain morphological varieties of diamond cubes
by: V. M. Kvasnytsia
Published: (2023)

Research of thermal conductivity, electrical resistivity and microwave absorption of microwave frequency radiation of AlN–Y2O3–Mo and AlN–Y2O3–TiN pressureless sintered composites
by: V. I. Chasnyk, et al.
Published: (2020)

Untitled
by: Yan Aijun, et al.
Published: (2011)

Study on soil corrosion principles of the Q235 steel ground net in Weinan Shaanxi
by: Yan Aijun, et al.
Published: (2011)

Effect of graphite addition on impregnated diamond bit properties
by: Lanlan Xie, et al.
Published: (2019)

Sintering trajectory of the 2.88 Y2O3–0.12 Nd2O3–5Al2O3 powders of different sizes
by: Ju. Kosjanov, et al.
Published: (2015)

Syngrapha ain — новый вид совок-металловидок (Lepidoptera, Noctuidae) фауны Украины
by: Ключко, З.Ф., et al.
Published: (2010)

Thermal analysis of FeCoCu pre-alloyed powders used for diamond tools
by: Delong Xie, et al.
Published: (2018)

New characterizations for differences of composition operators between weighted-type spaces in the unit ball
by: Chen, C., et al.
Published: (2021)

Condition for intersection occupation measure to be absolutely continuous
by: Chen, X., et al.
Published: (2020)

Superhard pcBN tool materials with Ti₃SiC₂ MAX-phase binder: structure, properties, application
by: Kolabylina, T., et al.
Published: (2017)

Effect of the additive of Y2O3 on the structure formation and properties of composite materials based on AlN–SiC
by: T. B. Serbeniuk, et al.
Published: (2018)

Feynman–Kac representation of parabolic Anderson equations with general Gaussian noise
by: Chen, Xia, et al.
Published: (2023)

Modification of sintered iron properties by Y₂O₃ nanoparticles
by: Cherednyk, M.I., et al.
Published: (2016)

A stressed state in the cutting zone of the PcBN tool with coating based on TiAlSiYN system
by: A. S. Manokhin, et al.
Published: (2022)

Heat conductivity, physico-mechanical properties and interrelations of them and structures of pressureless sintered composites produced of Si3N4–Al2O3–Y2O3(–ZrO2) nanodispersed system
by: O. N. Kajdash, et al.
Published: (2014)

Promising types of coatings for PCBN tools
by: A. S. Manokhin, et al.
Published: (2018)

Microstructures and properties of Fe–Co–Cu pre-alloyed powder for geological diamond bits
by: D. Xie, et al.
Published: (2019)

Mathematic modeling of diffusion processes of the formation of rim-core structure at sintering TiC–Ni alloys with alloying carbide additions
by: N. V. Lytoshenko
Published: (2016)

Investigation of the formation during sintering diamond-carbide plates with activation additions
by: V. Z. Turkevych, et al.
Published: (2017)

Thermobaric sintering of cBN-Cr3C2 composite
by: K. V. Slipchenko, et al.
Published: (2017)

Evaluation of diamond-coated tools in drilling high-strength CFRP composites
by: J. Xu, et al.
Published: (2022)

Modular Ordinary Differential Equations on SL(2, ℤ) of Third Order and Applications
by: Chen, Zhijie, et al.
Published: (2022)

Co-Axial Metrics on the Sphere and Algebraic Numbers
by: Chen, Zhijie, et al.
Published: (2024)

New characterizations for differences of composition operators between weighted-type spaces in the unit ball
by: C. Chen
Published: (2021)

A comprehensive review on liver regeneration termination – a non-neglectable phase
by: X. Chen
Published: (2024)

A note on a bound of Adan-Bante
by: Xiaoyou Chen
Published: (2014)

Feynman–Kac representation of parabolic Anderson equations with general Gaussian noise
by: X. Chen
Published: (2023)

The enlightenment of China's cultural soft power development on Ukraine
by: Chenlin, Chen
Published: (2018)