Improving wear and corrosion properties of magnesium alloy by cold sprayed nano WC–17Co coating
Saved in:
| Date: | 2021 |
|---|---|
| Main Authors: | Chen Jie, Song Hui, Liu Guang, Zheng Ziyun, Tang Jiayun, Cui Lang |
| Format: | Article |
| Language: | English |
| Published: |
2021
|
| Series: | Superhard Materials |
| Online Access: | http://jnas.nbuv.gov.ua/article/UJRN-0001320656 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASSimilar Items
Microstructure and Wear Resistance of an Arc-Sprayed Fe-Based Coating after Surface Kemelting Treatment
by: H. L. Tian, et al.
Published: (2014)
by: H. L. Tian, et al.
Published: (2014)
Microstructure and Wear Resistance of an Arc-Sprayed Fe-Based Coating after Surface Kemelting Treatment
by: Tian, H.L., et al.
Published: (2014)
by: Tian, H.L., et al.
Published: (2014)
Microstructure and wear-resistant properties of WC/SS316L composite coatings prepared by gas-dynamic spraying with application of laser heating
by: B. Li, et al.
Published: (2016)
by: B. Li, et al.
Published: (2016)
Reduction of WO3 to WC nano particles by reflux reaction
by: R. Kumar, et al.
Published: (2013)
by: R. Kumar, et al.
Published: (2013)
Soatings based on nano clad powders for the corrosion protection of magnesium alloys
by: I. V. Smyrnov, et al.
Published: (2012)
by: I. V. Smyrnov, et al.
Published: (2012)
Influence of µ-size WC on the corrosion behavior of ultrafine WC/WC–Co cemented carbides
by: C. Liu, et al.
Published: (2019)
by: C. Liu, et al.
Published: (2019)
Peculiarities of metallurgical processes in plasma-arc spraying of coatings produced from steel wire with powder fillers WC and WC–Co
by: G. M. Grigorenko, et al.
Published: (2015)
by: G. M. Grigorenko, et al.
Published: (2015)
High velocity air-fuel spraying of heat and wear resistant coatings
by: V. M. Kysil, et al.
Published: (2010)
by: V. M. Kysil, et al.
Published: (2010)
Phase composition, microstructure and wear properties of Ni/Ni3Si composites prepared by mechanical alloying
by: Junxi Zhang, et al.
Published: (2021)
by: Junxi Zhang, et al.
Published: (2021)
Nano-dispersed films deposited with pulsed laser spraying of Ni-Au combined targets
by: A. G. Bagmut, et al.
Published: (2010)
by: A. G. Bagmut, et al.
Published: (2010)
Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
by: Chen, L., et al.
Published: (2017)
by: Chen, L., et al.
Published: (2017)
Wear resistance of nano-polycrystalline diamond with various hexagonal diamond contents
by: A. Kurio, et al.
Published: (2012)
by: A. Kurio, et al.
Published: (2012)
Wear resistance of nano-polycrystalline diamond with various hexagonal diamond contents
by: Kurio, A., et al.
Published: (2012)
by: Kurio, A., et al.
Published: (2012)
Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
by: L. Chen, et al.
Published: (2017)
by: L. Chen, et al.
Published: (2017)
Surface Treatment with the Cold Roll Bonding Process for an Aluminum Alloy and Mild Steel
by: Tang, C., et al.
Published: (2015)
by: Tang, C., et al.
Published: (2015)
Wear resistance of Fe-Cr–Mn–Ti–Al coatings sprayed by powder wires
by: L. I. Bohun, et al.
Published: (2019)
by: L. I. Bohun, et al.
Published: (2019)
Abrasive wear resistance of alloyed electric arc sprayed coatings from powder wires
by: V. M. Hvozdetskyi
Published: (2018)
by: V. M. Hvozdetskyi
Published: (2018)
Investigation of structure and properties of thermal coatings of WC-Co-Cr system produced by high-velocity methods of spraying
by: B. S. Borisov, et al.
Published: (2015)
by: B. S. Borisov, et al.
Published: (2015)
Wear and corrosion resistance of electric-arc coatings, sprayed with cord wires of type Stein-Mesyfil
by: Yu. Gargasas, et al.
Published: (2014)
by: Yu. Gargasas, et al.
Published: (2014)
Wear resistance and strength of tungsten carbides WC–W2C produced by different methods
by: A. I. Belyj
Published: (2010)
by: A. I. Belyj
Published: (2010)
Influence of micron WC addition on the microstructure and mechanical properties of ultrafine WC–Co cemented carbides at the elevated temperature
by: C. Liu, et al.
Published: (2018)
by: C. Liu, et al.
Published: (2018)
Matrix Spherical Functions for (SU(𝑛 + 𝑚), S(U(𝑛) × U(𝑚))) : Two Specific Classes
by: Liu, Jie
Published: (2023)
by: Liu, Jie
Published: (2023)
Effect of Pin Diameters on the Wear Characteristics of Friction Pairs
by: Wei, Y.H., et al.
Published: (2019)
by: Wei, Y.H., et al.
Published: (2019)
Structure and wear resistance of VC–FeCr and VC–FeCrCo coatings obtained by supersonic gas-flame spraying
by: M. M. Student, et al.
Published: (2018)
by: M. M. Student, et al.
Published: (2018)
Spray dryers in biotechnology
by: Yu. I. Sydorov
Published: (2012)
by: Yu. I. Sydorov
Published: (2012)
МІКРОКРИСТАЛИ WC, ВИРОЩЕНІ З WC–Co РОЗПЛАВІВ
by: Бондаренко, В.П., et al.
Published: (2025)
by: Бондаренко, В.П., et al.
Published: (2025)
Effect of Nano-TiO₂ Particles on Wear and Corrosion Behaviour of AA6063 Surface Composite Fabricated by Friction Stir Processing
by: Muthukrishnan, D., et al.
Published: (2018)
by: Muthukrishnan, D., et al.
Published: (2018)
Behavior of magnesium in electroslag melting of wastes of aluminium magnesium-containing alloys
by: A. V. Gnatushenko
Published: (2013)
by: A. V. Gnatushenko
Published: (2013)
Characterization on the cardiac function of hypothermic dogs from cold water immersion
by: Chengxiang Lei, et al.
Published: (2011)
by: Chengxiang Lei, et al.
Published: (2011)
Study on cutting performance and tool wear of micro-textured tool for milling Ti6Al4V
by: Shen Xiang-yu, et al.
Published: (2017)
by: Shen Xiang-yu, et al.
Published: (2017)
Dynamics of spraying multicomponent materials
by: Kh. Draganov, et al.
Published: (2017)
by: Kh. Draganov, et al.
Published: (2017)
Characterization of tool wear when machining Alloy 718 with high pressure cooling using conventional and surface-modified WC–Co tools
by: Hoier, P., et al.
Published: (2017)
by: Hoier, P., et al.
Published: (2017)
Effect of electric-magnetic composite field on WC particulate reinforced metal matrix composites layers by laser melt injection
by: L. Van, et al.
Published: (2016)
by: L. Van, et al.
Published: (2016)
Investigation of spraying spot and pattern of metallization under conditions of microplasma spraying of titanium dioxide coating
by: Ju. S. Borisov, et al.
Published: (2014)
by: Ju. S. Borisov, et al.
Published: (2014)
Effect of technological factors of microplasma spraying of TiO2 on amount of applied sprayed material
by: Ju. S. Borisov, et al.
Published: (2016)
by: Ju. S. Borisov, et al.
Published: (2016)
New characterizations for differences of composition operators between weighted-type spaces in the unit ball
by: Chen, C., et al.
Published: (2021)
by: Chen, C., et al.
Published: (2021)
Surface Strengthening Behavior of Magnesium Alloy with Laser Thermal Loading under Rapid Cooling
by: Ge, Y.Q., et al.
Published: (2018)
by: Ge, Y.Q., et al.
Published: (2018)
Nano-microcomposite and combined coatings on Ti-Si-N/WC-Co-Cr/steel and Ti-Si-N/(Cr₃C₂ )₇₅-(NiCr)₂₅ base: their structure and properties
by: Erdybaeva, N.K.
Published: (2010)
by: Erdybaeva, N.K.
Published: (2010)
Thermal factor effect on phase formation, structure, substructure features, and stress state in ion-plasma nano-crystalline condensates of quasi-binary WC-TiC carbide
by: Sobol`, O.V.
Published: (2007)
by: Sobol`, O.V.
Published: (2007)
Effect of parameters of plasma spraying conditions using current-carrying wire on fraction composition of spraying particles
by: G. M. Rusev, et al.
Published: (2013)
by: G. M. Rusev, et al.
Published: (2013)
Similar Items
-
Microstructure and Wear Resistance of an Arc-Sprayed Fe-Based Coating after Surface Kemelting Treatment
by: H. L. Tian, et al.
Published: (2014) -
Microstructure and Wear Resistance of an Arc-Sprayed Fe-Based Coating after Surface Kemelting Treatment
by: Tian, H.L., et al.
Published: (2014) -
Microstructure and wear-resistant properties of WC/SS316L composite coatings prepared by gas-dynamic spraying with application of laser heating
by: B. Li, et al.
Published: (2016) -
Reduction of WO3 to WC nano particles by reflux reaction
by: R. Kumar, et al.
Published: (2013) -
Soatings based on nano clad powders for the corrosion protection of magnesium alloys
by: I. V. Smyrnov, et al.
Published: (2012)