Buchumschlag

Analytical study of technological and design parameters of section casting-and-rolling unit&#039;s influence on finished rolled steel accuracy

Gespeichert in:

Bibliographische Detailangaben
Datum:	2013
1. Verfasser:	S. I. Badjuk
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2013
Schriftenreihe:	Fundamental and applied problems of ferrous metallurgy
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000839604
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Integrated methods for estimation the efficiency of production of flat rolled steel in different integrated units for casting and rolling processing combination
von: S. A. Vorobej, et al.
Veröffentlicht: (2013)

Rheological properties of steel at roll casting-rolling
von: O. V. Nohovitsyn, et al.
Veröffentlicht: (2014)

Steel strip solidification in twin-roll casting unit
von: N. I. Tarasevich, et al.
Veröffentlicht: (2016)

Rolling of the bimetallic aluminum-steel strips received by roller casting rolling
von: Ju. Gridin, et al.
Veröffentlicht: (2013)

Influence of crystallization parameters and the hot deformation on characteristics of steel structure of with roll rolling
von: S. E. Kondratiuk, et al.
Veröffentlicht: (2016)

Salculation of Temperature in strips casting-rolling steel
von: A. V. Nogovitsyn, et al.
Veröffentlicht: (2014)

Features of forming rolled formed sections in the rolls of the mill
von: M. E. Doktorov, et al.
Veröffentlicht: (2013)

Problems of rolling schedule choosing with switching of light section and wire rod mills to continuously cast blank
von: S. A. Vorobej, et al.
Veröffentlicht: (2012)

Influence of regulated cooling on quality of a rolling roll from chilled cast iron
von: V. E. Khrychikov, et al.
Veröffentlicht: (2017)

Information-analytical system of stabilization properties of rolled steel
von: E. V. Prykhodko, et al.
Veröffentlicht: (2011)

Coefficient of crystallization speed twin-roll casting steel and aluminium
von: A. V. Nogovitsyn, et al.
Veröffentlicht: (2013)

Problems of development of industrial usage of technology of double-roll casting and rolled of aluminum and iron-carbon alloys
von: I. R. Baranov
Veröffentlicht: (2018)

Prediction of solidification parameters for twin-roll thin strip casting
von: N. I. Tarasevich, et al.
Veröffentlicht: (2016)

The accuracy of rolling thickness adjustment in conditions of high-frequency disturbances taking into account the speed of roll setting devices
von: Yu. Potap, et al.
Veröffentlicht: (2022)

Mathematical and software for the study of the dynamics of the finished rolling mill block wire mill
von: V. I. Bolshakov, et al.
Veröffentlicht: (2018)

Analysis of the amount of retained austenite in the structure of steel rolls for sheet rolling
von: S. V. Bobyr, et al.
Veröffentlicht: (2020)

Investigation of the influence of hot asymmetric rolling on the formation of microstructure, mechanical properties and performance characteristics of finished products
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2019)

The implementation of the thermomechanical controlled rolling technology in rolling mill 1700
von: A. G. Kurpe, et al.
Veröffentlicht: (2017)

Research of technological parameters of hot variety rolling in the production of corrosion-resistant and fire-resistant reinforcement rolling
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2022)

Development stages for small section and rod mills and casting-rolling aggregate for small section and wire rod production
von: Ju. V. Konovalov, et al.
Veröffentlicht: (2015)

Numerical modelling of hydrodynamic and thermal processes at continuous twin-roll steel casting.
von: A. V. Nogovitsyn, et al.
Veröffentlicht: (2015)

Determination of the heat transfer coefficient in the metal-roll system at twin-roll casting of aluminum alloys
von: S. V. Bondarenko, et al.
Veröffentlicht: (2013)

Improvement of the surfacing technology for large backup rolls of hot rolling mills
von: L. K. Leshchynskyi, et al.
Veröffentlicht: (2021)

New concept of rolling improving for shaped sections and modernization of rail and linear rolling mills. Message 2
von: S. A. Sukhomlin
Veröffentlicht: (2016)

Manufacture of wire rods with extended dimensions and grades in the view of rational parameters of sizing and desired rolling accuracy
von: A. A. Gorbanev, et al.
Veröffentlicht: (2017)

About some rolling parameters calculation
von: V. A. Nikolaev
Veröffentlicht: (2009)

Influence of nonmetallics on formation of pores during hot rolling of bearing steel
von: O. M. Moroz, et al.
Veröffentlicht: (2015)

Simulation of phase transformations in alloy steels subjected to cooling during heat treatment of rolling-mill rolls
von: S. V. Bobyr, et al.
Veröffentlicht: (2017)

Classification of surface technological defects of metal roll in metal-roll by means of deep neuron network
von: I. V. Konovalenko, et al.
Veröffentlicht: (2020)

Modeling valkovoe casting-rolling of aluminum by finite element method
von: Ju. Prikhodko, et al.
Veröffentlicht: (2014)

Influence of the special features of contact interaction of the thin strip with rolls on the parameters of the initial setting of the working stand and the least thickness of the rolled strip
von: Ja. D. Vasilev, et al.
Veröffentlicht: (2019)

Force parameters in the process of drawing in free rolls
von: V. A. Nikolaev, et al.
Veröffentlicht: (2009)

Analysis of the asymmetrically rolling parameters of titanium powder
von: Ju. Prikhodko, et al.
Veröffentlicht: (2015)

Prediction of the Conditions for the Formation of a Thin Strip of High-Strength Aluminum Alloys, Depending on the Speed of Casting Rolls and Technological Parameters
von: M. I. Tarasevych, et al.
Veröffentlicht: (2020)

Neutral corner while rolling in the non-driving rolls
von: A. I. Leshchenko, et al.
Veröffentlicht: (2012)

The research of technological parameters&#039; influence at formation of centrifugal rolls&#039; working layer
von: N. A. Zhizhkina
Veröffentlicht: (2013)

Development and investigation of end-to-end technology of bearing steel melting for electroslag remelting and production of section rolled metal of large profile sizes
von: V. N. Kornievskij, et al.
Veröffentlicht: (2016)

Prediction of a High Temperature Bonding Condition at the Interface for the Hot-Rolled Stainless Steel Clad Plate on Rolling
von: Guan, B., et al.
Veröffentlicht: (2018)

Profiling bypass rolls for improving the flatness of the bands at the cold rolling
von: V. A. Nikolaev, et al.
Veröffentlicht: (2009)

The signs of carbide phase degradation in cast irons at temperatures of forming rolls
von: T. S. Skoblo, et al.
Veröffentlicht: (2020)