Buchumschlag

Effect of heat treatment, microalloying with boron and ageing treatment on the work of fracture of wire rod under tension

Gespeichert in:

Bibliographische Detailangaben
Datum:	2013
Hauptverfasser:	V. V. Parusov, S. A. Vorobej, L. V. Sagura, E. V. Parusov, O. V. Parusov, I. N. Chujko
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2013
Schriftenreihe:	Fundamental and applied problems of ferrous metallurgy
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000839608
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Scientific and technological achievements of metal heat treatment for mechanical engineering in 2009 - 2014
von: V. V. Parusov, et al.
Veröffentlicht: (2014)

Influence of a kind treatment on the austenite grain high carbon steel
von: E. V. Parusov, et al.
Veröffentlicht: (2014)

Scientific and technological fundamentals of the production of highly efficient types of construction steel and wire rod
von: E. V. Parusov, et al.
Veröffentlicht: (2019)

Development of the theory of pearlite transformation in steel
von: V. V. Parusov, et al.
Veröffentlicht: (2013)

Features of wear of friction couples of rope-block and rope-drum under the working conditions of lifting and traction devices
von: E. V. Parusov, et al.
Veröffentlicht: (2022)

Specifics of the effect of non-metallic inclusions on mechanical properties and low-cyclic durability of steel ropes during operation in aggressive environment
von: S. I. Gubenko, et al.
Veröffentlicht: (2018)

Modern requirements for quality of wire rod wide Grades
von: I. N. Chujko
Veröffentlicht: (2015)

Influence of Heat Treatment on Spatial Distribution of Chemical Elements in Welding Microalloyed Steels
von: Tkachenko, I.F., et al.
Veröffentlicht: (2015)

Influence of Heat Treatment on Spatial Distribution of Chemical Elements in Welding Microalloyed Steels
von: I. F. Tkachenko, et al.
Veröffentlicht: (2015)

Models of Long-Term Brittle Fracture of Rods under Tension and Compression in Condition of Creep
von: Ju. M. Kobzar
Veröffentlicht: (2017)

Features of microalloying with boron during smelting of low-alloy structural steels
von: Ju. Nazjuta, et al.
Veröffentlicht: (2018)

The effect of eccentric tension on the corrosion-fatigue resistance of pump rods
von: H. V. Krechkovska, et al.
Veröffentlicht: (2024)

Problems of theory of diaphysis fractures treatment
von: A. K. Popsujshapka, et al.
Veröffentlicht: (2014)

Problem of overweight in treatment of patients with tibial fractures
von: M. I. Berezka, et al.
Veröffentlicht: (2021)

Modern techniques in olecranon fracture treatment
von: P. M. Zhuk, et al.
Veröffentlicht: (2015)

Selection of the optimum composition for low-carbon wire rod
von: A. S. Kozachjok, et al.
Veröffentlicht: (2012)

Manufacture of wire rods with extended dimensions and grades in the view of rational parameters of sizing and desired rolling accuracy
von: A. A. Gorbanev, et al.
Veröffentlicht: (2017)

Comparative analysis of the kinetics of martensitic transformation in low-alloy structural steel by dilatometric and calculation methods
von: I. M. Chuiko, et al.
Veröffentlicht: (2024)

Influence of heat treatment on local fracture susceptibility of HAZ metal of titanium-stabilized austenitic steel
von: Ju. V. Poletaev
Veröffentlicht: (2012)

Increase of fatigue strength of pumping rods with treatment by a special technological environment
von: B. V. Kopei, et al.
Veröffentlicht: (2020)

Matching of compatible work of short high-voltage pulses of tension generator and water treatment chamber by dint of pulse barrier discharge
von: V. O. Bereka, et al.
Veröffentlicht: (2021)

Problems of rolling schedule choosing with switching of light section and wire rod mills to continuously cast blank
von: S. A. Vorobej, et al.
Veröffentlicht: (2012)

Influence of heat treatment on the structure and fracture mode of welded joints of sparsely-alloyed titanium alloy
von: S. H. Hryhorenko, et al.
Veröffentlicht: (2021)

Features of structure sheet low alloy steel in combined heat treatment
von: V. L. Pljuta, et al.
Veröffentlicht: (2015)

Study of the effect of microalloying with boron on the corrosion behavior of low-carbon structural steel in different structural states
von: V. G. Razdobreev
Veröffentlicht: (2019)

The influence of hydrogenation on fracture of nitinol alloy under tension
von: V. P. Yasnii, et al.
Veröffentlicht: (2019)

Development stages for small section and rod mills and casting-rolling aggregate for small section and wire rod production
von: Ju. V. Konovalov, et al.
Veröffentlicht: (2015)

Heat treatment of castings using foundry heat
von: Ye. Kondratiuk, et al.
Veröffentlicht: (2020)

Regional anesthesia with prolonged analgesia in treatment of multiple fractures of limbs
von: R. P. Chaplynskyi, et al.
Veröffentlicht: (2017)

Experimental study of the coefficient of elasticity of the wire used for secondary steel treatment in ladles
von: V. P. Piptjuk, et al.
Veröffentlicht: (2013)

Features of external rod-controlled fixation in calcaneal fractures
von: O. I. Bodnia
Veröffentlicht: (2019)

On the possibility of forecasting mechanical properties of cold-deformed metal products from pearlite grade steel
von: E. V. Parusov, et al.
Veröffentlicht: (2021)

Effect of Aging Treatment on Surface Roughness, Mechanical Properties, and Fracture Behavior of 6xxx and 7xxx Aluminum Alloys
von: I. Sevim, et al.
Veröffentlicht: (2014)

Modeling the Process of Damage of Rods owing to Multi-cycle Fatigue in Conditions of Tension-Compression
von: Yu. M. Kobzar
Veröffentlicht: (2022)

Influence of microalloying with boron on the structure and properties of deposited metal of the type of tool steel 25Kh5FMS
von: A. A. Babinets, et al.
Veröffentlicht: (2022)

Using of Pulse Current Treatment for reduction of liability to brittle fracture in mild steels
von: H. V. Stepanov, et al.
Veröffentlicht: (2013)

New approaches to treatment of age-related macular degeneration
von: I. A. Soboleva
Veröffentlicht: (2019)

Welding, cutting and heat treatment of live tissues
von: B. E. Paton, et al.
Veröffentlicht: (2013)

New effective approach to treatment of mandibular angular fracture on background of osteoporosis
von: O. O. Likhitskyi
Veröffentlicht: (2020)

Influence of thermal strengthening technology on variability of mechanical properties of rolled metal product
von: E. V. Parusov, et al.
Veröffentlicht: (2020)