Buchumschlag

Investigation of Cold Rolling Influence on near Surface Residual Stress Distribution in Explosive Welded Multilayer

Gespeichert in:

Bibliographische Detailangaben
Datum:	2012
Hauptverfasser:	M. Sedighi, M. Honarpisheh
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2012
Schriftenreihe:	Strength of Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000577280
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Investigation of Cold Rolling Influence on near Surface Residual Stress Distribution in Explosive Welded Multilayer
von: Sedighi, M., et al.
Veröffentlicht: (2012)

Investigations of residual stresses in whole-rolled railway wheels
von: A. V. Koshuljan, et al.
Veröffentlicht: (2013)

Calculation of parameters of explosion treatment for reduction of residual stresses in circumferential welds of pipelines
von: A. G. Bryzgalin
Veröffentlicht: (2013)

Determination of residual stresses in cylinder with thin multilayer coating
von: V. A. Shevchuk
Veröffentlicht: (2012)

Multilayer structures of high crack resistance, formed by explosion welding
von: R. P. Didyk, et al.
Veröffentlicht: (2015)

Investigation and Characterization of Residual Stress on Prestressed Steel I-Beams Manufactured by Welding
von: A. Цzer, et al.
Veröffentlicht: (2015)

Widening of technological capabilities of explosion treatment for reduction of residual stresses in welded joints of decomposers of up to 5000 m3 volume
von: L. M. Lobanov, et al.
Veröffentlicht: (2009)

Simplified Modelling of Tandem Cold Rolling
von: Slimani, K., et al.
Veröffentlicht: (2018)

Cleaning and activation of surfaces being welded in the process of explosion welding
von: L. B. Pervukhin, et al.
Veröffentlicht: (2010)

Profiling bypass rolls for improving the flatness of the bands at the cold rolling
von: V. A. Nikolaev, et al.
Veröffentlicht: (2009)

Inside welds: advanced characterization of residual stresses by neutron diffraction
von: M. Rogante
Veröffentlicht: (2020)

Application of emulsion explosives for explosion welding
von: V. V. Silvestrov, et al.
Veröffentlicht: (2009)

Electrophysical Unsteady Processes in the System to Reduce Residual Stresses Welds
von: L. M. Lobanov, et al.
Veröffentlicht: (2016)

Surface Treatment with the Cold Roll Bonding Process for an Aluminum Alloy and Mild Steel
von: Tang, C., et al.
Veröffentlicht: (2015)

Evaluation of efficiency of reduction of residual stresses in circumferential joints of pipes using postweld explosion treatment
von: A. G. Bryzgalin
Veröffentlicht: (2014)

Determining of the influence of residual stresses on the strength of welded shell machine-building structures with axial surface cracks in the weld zone
von: Yu. V. Porokhovskyi
Veröffentlicht: (2013)

Residual stresses accounting in titanium alloys surface strengthening
von: Павленко, В. Н.
Veröffentlicht: (2016)

Residual stresses accounting in titanium alloys surface strengthening
von: Павленко, В. Н.
Veröffentlicht: (2016)

Residual stresses accounting in titanium alloys surface strengthening
von: V. N. Pavlenko
Veröffentlicht: (2011)

Prediction of limiting amplitudes of cycle of stresses of welded joints with steady-state residual stresses
von: V. A. Degtjarev
Veröffentlicht: (2016)

Residual stress calculationin the weld region during welding of thick plates by the electron-beam method
von: V. P. Skalskyi, et al.
Veröffentlicht: (2012)

Rolls roughness change during their exploitation and its impact on polluted cold-rolled metal
von: E. N. Shebanits, et al.
Veröffentlicht: (2012)

Residual stress management in welding: measurement, fatigue analysis and improvement treatments
von: Yu. Kudryavtsev, et al.
Veröffentlicht: (2013)

Residual stress management in welding: measurement, fatigue analysis and improvement treatments
von: Kudryavtsev, Yu., et al.
Veröffentlicht: (2013)

The Mathematical Simulation of Electromechanical Systems of Cold Rolling Mills
von: E. S. Nazarova
Veröffentlicht: (2015)

Effect of residual stresses in surfacing at pins fastening in mill body
von: V. A. Korotkov
Veröffentlicht: (2013)

Channel effect in explosion welding
von: L. D. Dobrushin, et al.
Veröffentlicht: (2009)

The methodology of investigation of thermal stressed state of bodies with thin multilayer coatings
von: V. A. Shevchuk
Veröffentlicht: (2021)

Modeling of residual stresses in the area of technological welds of PWR-1000 reactor shells
von: O. V. Makhnenko, et al.
Veröffentlicht: (2018)

Fatigue resistance of steel welded joints of different strength with final residual stresses
von: V. A. Degtjarev
Veröffentlicht: (2018)

The influence of material anisotropy on the stress distribution near the parabolic notch
von: M. P. Savruk, et al.
Veröffentlicht: (2015)

Possible options for the production of tinplate and cold-rolled sheet in Ukraine
von: Ju. V. Konovalov, et al.
Veröffentlicht: (2015)

Influence of parameters of electrodynamic treatment on residual stresses of welded joints of AMG6 alloy
von: L. M. Lobanov, et al.
Veröffentlicht: (2019)

Investigation of adhesion strength and residual stresses of epoxy composites modified with microwave electromagnetic processing
von: P. D. Stukhliak, et al.
Veröffentlicht: (2015)

The residual stresses effect on stress intensity factors for a surface crack in a rail head
von: H. P. Marchenko
Veröffentlicht: (2010)

Chambers for explosion welding of metals (Review)
von: P. S. Shlenskij, et al.
Veröffentlicht: (2011)

Development of technology and equipment for reduction of residual stresses and straightening in welded structures applying electrodynamic treatment
von: L. M. Lobanov, et al.
Veröffentlicht: (2017)

Modeling of residual welding stresses, radiation swelling and stressed state of enclosure of the reactor VVER-1000 in the process of operation
von: O. V. Makhnenko, et al.
Veröffentlicht: (2016)

Prediction of residual stresses after welding of duplex steel taking into account phase transformations
von: O. S. Kostenevych, et al.
Veröffentlicht: (2021)

Mathematical model of determination of residual stresses and strains in friction stir welding of aluminium alloy
von: B. R. Tsaryk, et al.
Veröffentlicht: (2022)