Cover Image

Wear and life of tools with inserts from cBN-based polycrystalline superhard materials in the finish turning of hardened steels at heavy feeds

Saved in:

Bibliographic Details
Date:	2012
Main Authors:	S. A. Klimenko, A. S. Manokhin, Ju. A. Melnijchuk
Format:	Article
Language:	English
Published:	2012
Series:	Superhard Materials
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000696641
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Study of the effect of the wear of a cutting tool from cBN-based composite on the probability of the tool fracture in finish turning of hardened steels
by: L. N. Devin, et al.
Published: (2012)

Study of the contact zone parameters and stresses on the rake face of a tool equipped by a cBN-based PSHM in turning hardened steel
by: S. A. Klimenko, et al.
Published: (2015)

Study of the effect of the wear of a cutting tool equipped with a plate of a cBN-based composite on its vibrations in finish turning of hardened steels
by: N. E. Stakhniv, et al.
Published: (2012)

Tool wear and tool life of PCBN, binderless cBN and wBN_cBN tools in continuous finish hard turning of cold work tool steel
by: V. M. Bushlja, et al.
Published: (2014)

Changes of the micro profile of the machined surface due to the size wear of the cutter from the composite cbn at the finish turning of hardened steel
by: N. E. Stakhniv
Published: (2017)

Study of cBN based composite cutters wearing and its influence on the fracture tool probability at the fine turning of the hardened steels
by: N. E. Stakhniv, et al.
Published: (2016)

Methods of cutting for workpieces of hardmetal and cBN_based polycrystalline superhard material
by: A. F. Salenko, et al.
Published: (2015)

Novel wear-resistant superhard diamond composite polycrystalline material
by: A. A. Shulzhenko, et al.
Published: (2018)

Sintering of superhard cBN-based materials with Ti4WC5
by: D. A. Stratiichuk, et al.
Published: (2020)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
by: V. K. Starkov, et al.
Published: (2014)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
by: V. K. Starkov, et al.
Published: (2014)

Composites of the cBN–Si₃N₄ system reinforced by SiCw for turning tools
by: Osipov, A.S., et al.
Published: (2016)

Investigation of the effect of cutting conditions on the roughness of a surface machined in fine turning of hardened steel by cutters of a cBN-based composite
by: N. E. Stakhniv
Published: (2013)

The influence of VC–Al additive on wear resistance of cBN-based composites
by: K. V. Slipchenko, et al.
Published: (2018)

The influence of VC-Al additive content on structure and phase composition of cBN based superhard materials
by: K. V. Slipchenko, et al.
Published: (2018)

Cutting of polycrystalline superhard materials by jet methods
by: A. F. Salenko, et al.
Published: (2016)

AlN–(TiCr)B2 ion–plasma coating for cutting tools of cBN_based polycrystalline superhard material
by: S. A. Klimenko, et al.
Published: (2014)

The mechanism of wearing of cutting tools based on cBN for precision wear-resistant high-chromium pig-iron
by: K. O. Diadiura, et al.
Published: (2015)

The phonomenon of material side flow during finish turning of EN X153CrMoV12 hardened steel with tools based on polycrystalline cubic boron nitride
by: Ociepa, M., et al.
Published: (2019)

The phonomenon of material side flow during finish turning of EN X153CrMoV12 hardened steel with tools based on polycrystalline cubic boron nitride
by: M. Ociepa, et al.
Published: (2019)

Composites of the cBN–Si3N4 system reinforced by SiCw for turning tools
by: A. S. Osipov, et al.
Published: (2016)

Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
by: T. Zhao, et al.
Published: (2017)

Study of the effect of cutting speed on the cutting forces components and cutting temperature, roughness and waviness of the machined surface during finish turning of hardened HVG steel with PcBN cutters
by: Ye. Stakhniv, et al.
Published: (2022)

Study of the influence of phase composition of cutting inserts made of diamond–tungsten carbide nanocomposite on the process of finish turning of aluminum alloys and brass
by: N. E. Stakhniv, et al.
Published: (2018)

Formation of superhard com posites of the BL group in the cBN—Ti —WC—(Al) system under the HPHT-conditions
by: D. A. Stratiichuk, et al.
Published: (2020)

Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryo treated cermet inserts
by: Anshuman Das, et al.
Published: (2019)

Фізико–механічні властивості надтвердих композитів систем cBN-Ті, cBN-Al, cBN-перехідний метал-Al, отриманих реакційним спіканням за високого тиску
by: Романенко, Я.М., et al.
Published: (2015)

Drilling of composites using tools of polycrystalline superhard materials
by: L. N. Devin, et al.
Published: (2018)

Influence of Sn and Bi additions on the structures and wear properties of Cu–Sn–P–Ce cBN tools
by: Han, P., et al.
Published: (2018)

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
by: Chen, L., et al.
Published: (2017)

Influence of Sn and Bi additions on the structures and wear properties of Cu–Sn–P–Ce cBN tools
by: P. Han, et al.
Published: (2018)

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
by: L. Chen, et al.
Published: (2017)

The influence of surface roughness of cutting inserts made of diamond–tungsten carbide composite on cutting forces and machining quality in turning aluminum alloys and brass
by: L. N. Devin, et al.
Published: (2018)

Obtaining superhard composites of the BL group in the cBN(Al)–SiB4—WC system under high pressure and high temperature conditions
by: D. A. Stratiichuk, et al.
Published: (2019)

Sintering of superhard instrumen talpurpose composites of the BL group in the cBN—NbC—Al system under high pressure and high temperature conditions
by: D. A. Stratiichuk, et al.
Published: (2020)

Wear intensity of the PcBN tools with nanolayered protective coating
by: A. S. Manokhin, et al.
Published: (2020)

Damping properties RSBN composites of the cBN–Ti, cBN–Al–metal systems, in dependence from technological conditions of receipt
by: Ya. M. Romanenko, et al.
Published: (2017)

Термобаричне спікання композиту cBN–Cr₃C₂
by: Сліпченко, К.В., et al.
Published: (2017)

Analysis of thermobaric contact phenomena and calculation of temperature fields during finishing turning of VT1-0 titanium alloy using a cutter with a diamond carbide insert
by: L. M. Devin, et al.
Published: (2020)

An increase of operating characteristics of cBN cutters by improving their damping properties
by: L. N. Devin, et al.
Published: (2012)