Cover Image

Study of the effect of the wear of a cutting tool equipped with a plate of a cBN-based composite on its vibrations in finish turning of hardened steels

Saved in:

Bibliographic Details
Date:	2012
Main Authors:	N. E. Stakhniv, L. N. Devin
Format:	Article
Language:	English
Published:	2012
Series:	Superhard Materials
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000696672
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Study of the effect of the wear of a cutting tool from cBN-based composite on the probability of the tool fracture in finish turning of hardened steels
by: L. N. Devin, et al.
Published: (2012)

Study of cBN based composite cutters wearing and its influence on the fracture tool probability at the fine turning of the hardened steels
by: N. E. Stakhniv, et al.
Published: (2016)

Investigation of the effect of cutting conditions on the roughness of a surface machined in fine turning of hardened steel by cutters of a cBN-based composite
by: N. E. Stakhniv
Published: (2013)

Changes of the micro profile of the machined surface due to the size wear of the cutter from the composite cbn at the finish turning of hardened steel
by: N. E. Stakhniv
Published: (2017)

Study of the effect of cutting speed on the cutting forces components and cutting temperature, roughness and waviness of the machined surface during finish turning of hardened HVG steel with PcBN cutters
by: Ye. Stakhniv, et al.
Published: (2022)

Wear and life of tools with inserts from cBN-based polycrystalline superhard materials in the finish turning of hardened steels at heavy feeds
by: S. A. Klimenko, et al.
Published: (2012)

Study of the contact zone parameters and stresses on the rake face of a tool equipped by a cBN-based PSHM in turning hardened steel
by: S. A. Klimenko, et al.
Published: (2015)

Tool wear and tool life of PCBN, binderless cBN and wBN_cBN tools in continuous finish hard turning of cold work tool steel
by: V. M. Bushlja, et al.
Published: (2014)

Investigation of cutting temperature in turning cutters with diamond-carbide plates
by: L. N. Devin, et al.
Published: (2018)

Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
by: T. Zhao, et al.
Published: (2017)

The mechanism of wearing of cutting tools based on cBN for precision wear-resistant high-chromium pig-iron
by: K. O. Diadiura, et al.
Published: (2015)

The influence of the cutting speed on the temperature and forces at the precision turning of nonferrous metals using cutters with round diamond-hard-alloyed plates
by: N. E. Stakhniv, et al.
Published: (2019)

Study of the influence of phase composition of cutting inserts made of diamond–tungsten carbide nanocomposite on the process of finish turning of aluminum alloys and brass
by: N. E. Stakhniv, et al.
Published: (2018)

The influence of cutting speed on cutting temperatures and forces in fine turning of VT1-0 titanium alloy by a PCD tool
by: L. N. Devin, et al.
Published: (2019)

Analysis of thermobaric contact phenomena and calculation of temperature fields during finishing turning of VT1-0 titanium alloy using a cutter with a diamond carbide insert
by: L. M. Devin, et al.
Published: (2020)

Cutting section parametrs for oblique fine turning with a radius tool
by: L. M. Devin, et al.
Published: (2019)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
by: V. K. Starkov, et al.
Published: (2014)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
by: V. K. Starkov, et al.
Published: (2014)

The influence of surface roughness of cutting inserts made of diamond–tungsten carbide composite on cutting forces and machining quality in turning aluminum alloys and brass
by: L. N. Devin, et al.
Published: (2018)

Sintering of cBN based materials with TaC binder for cutting tool application
by: K. V. Slipchenko, et al.
Published: (2020)

Composites of the cBN–Si₃N₄ system reinforced by SiCw for turning tools
by: Osipov, A.S., et al.
Published: (2016)

An increase of operating characteristics of cBN cutters by improving their damping properties
by: L. N. Devin, et al.
Published: (2012)

The influence of VC–Al additive on wear resistance of cBN-based composites
by: K. V. Slipchenko, et al.
Published: (2018)

Damping properties RSBN composites of the cBN–Ti, cBN–Al–metal systems, in dependence from technological conditions of receipt
by: Ya. M. Romanenko, et al.
Published: (2017)

Tribology of cutting by tools equipped with cBN_based PSHM
by: A. S. Manokhin, et al.
Published: (2014)

Composites of the cBN–Si3N4 system reinforced by SiCw for turning tools
by: A. S. Osipov, et al.
Published: (2016)

Фізико–механічні властивості надтвердих композитів систем cBN-Ті, cBN-Al, cBN-перехідний метал-Al, отриманих реакційним спіканням за високого тиску
by: Романенко, Я.М., et al.
Published: (2015)

Analysis of cutting edge wear during drilling composite materials
by: L. N. Devin, et al.
Published: (2017)

On Eigen Modes of Vibrations of Piezoelectric Circular Plates with Diameter Cuts of Electrodes
by: N. A. Shulga, et al.
Published: (2014)

Influence of Sn and Bi additions on the structures and wear properties of Cu–Sn–P–Ce cBN tools
by: Han, P., et al.
Published: (2018)

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
by: Chen, L., et al.
Published: (2017)

Influence of Sn and Bi additions on the structures and wear properties of Cu–Sn–P–Ce cBN tools
by: P. Han, et al.
Published: (2018)

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
by: L. Chen, et al.
Published: (2017)

Effect of damping properties of cutters on the probability of failure of the CBN plates
by: L. M. Devin, et al.
Published: (2016)

Equipment and materials for wear-resistant hardfacing of plate lining elements
by: A. P. Zhudra, et al.
Published: (2009)

A THIN CIRCULAR TURN WITH A CUT ABOVE A THIN-WALLED SHEET METAL
by: Gnatov, A. V.
Published: (2012)

Study of performance of cbn incisors &quot;borsinit&quot; when turning titanium alloy VT1-0
by: L. N. Devin, et al.
Published: (2016)

Термобаричне спікання композиту cBN–Cr₃C₂
by: Сліпченко, К.В., et al.
Published: (2017)

Твердые растворы в системах cBN-Al и cBN-Al-TiB₂, полученные при высоких давлениях и температурах
by: Беженар, Н.П., et al.
Published: (2011)

cBN–Cu composite: production method and physical properties
by: M. V. Nikishina
Published: (2012)