Buchumschlag

Structurally strengthened surface layers of contact surfaces of a SHM wheel and a workpiece machined as a factor of increasing their wear resistance (a film component)

Gespeichert in:

Bibliographische Detailangaben
Datum:	2012
1. Verfasser:	V. I. Lavrinenko
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2012
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000696760
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Structurally changed surface layers of contact surfaces of a SHM wheel and a workpiece as a factor of increasing their wear resistances (variation of elemental composition)
von: V. I. Lavrinenko
Veröffentlicht: (2013)

Peculiarities of shape change of the cutting surface of the grinding wheel in the circular direction when grinding wheels with a mixture of SHM grinding powders and with a modified surface of their grains
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2022)

Features of connection between parameters of roughness of the processed surface at grinding by wheels from a mix of grinding powders of SHM with the modified surface of grains
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2021)

The quality of workpiece surface in rough machining of materials with different hardness values by using segmented grinding wheels produced in Vietnam
von: T. P.G. Nguen
Veröffentlicht: (2016)

The influence of circumferential waviness of the diamond wheel working surface on the machined surface roughness
von: O. O. Pasichnyi, et al.
Veröffentlicht: (2019)

Strengthening technologies for the formation of wear-resistant surface layers
von: V. V. Tikhonenko, et al.
Veröffentlicht: (2011)

The process of abrasive processing as frictional interaction: a factor of the sludge availability on the cutting surface of diamond wheels
von: V. I. Lavrinenko
Veröffentlicht: (2020)

Increase of wear resistance of titanium using argon arc surfacing
von: V. P. Prilutskij, et al.
Veröffentlicht: (2012)

Conductance of a STM contact on the surface of a thin film
von: Khotkevych, N.V., et al.
Veröffentlicht: (2012)

Residual lifetime of a railway wheel axle with a surface transverse crack
von: V. R. Skalskyi, et al.
Veröffentlicht: (2016)

Wear-resistant arc surfacing over a layer of alloying charge
von: V. V. Peremitko
Veröffentlicht: (2014)

Increase of medium-carbon steel wear resistance by nanodispersion of surface layer
von: V. I. Kyryliv
Veröffentlicht: (2012)

Increase of brittle fracture resistance of metal of heat-affected zone in railway wheel surfacing
von: A. A. Gajvoronskij, et al.
Veröffentlicht: (2017)

Contact surface resistivity as a favorable condition of commutation process
von: V. T. Chemerys
Veröffentlicht: (2017)

Contact Surface Resistivity as a Favorable Condition of Commutation Process
von: Chemerys, V.T.
Veröffentlicht: (2017)

Structure and wear resistance of retailoring wheel flange
von: S. A. Bespalov
Veröffentlicht: (2009)

Modification of aluminum and titanium alloys surface for increasing their wear resistance and tribological characteristics
von: M. M. Student, et al.
Veröffentlicht: (2021)

Adhesional Contact of Bodies with a Curved Rough Surface
von: I. K. Valieieva
Veröffentlicht: (2021)

Modeling of the abrasive wear of convective heat transfer surfaces of a boiler
von: Shraiber O.A., et al.
Veröffentlicht: (2008)

Wear of a diamond wheel during grinding of ceramic balls from silicon carbide
von: S. V. Sokhan, et al.
Veröffentlicht: (2020)

The influence of surface nanostructuring on wear resistance of seeding machine ploughshare disks made of 65H steel
von: O. V. Maksymiv, et al.
Veröffentlicht: (2020)

Investigation of the processes of wear-resistant surface alloying
von: A. G. Kovalchuk, et al.
Veröffentlicht: (2017)

Increase reliability details of mining machines by the method of surface hardening
von: V. V. Zakora, et al.
Veröffentlicht: (2016)

Selection of wear-resistant materials for electroslag surfacing of mining equipment parts in a current-conducting mould
von: Yu. M. Lankin, et al.
Veröffentlicht: (2022)

An engineering method for calculating the abrasive wear of heat-transfer surfaces of a boiler
von: Yatsenko V.P., et al.
Veröffentlicht: (2009)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 1. Superabrasive composites
von: V. I. Lavrinenko
Veröffentlicht: (2019)

Increase in wear resistance and stability of a rail track of small-diameter curvilinear sections
von: V. V. Govorukha, et al.
Veröffentlicht: (2018)

Current-field diagram of magnetic states of a surface spin valve in a point contact with a single ferromagnetic film
von: Yanson, I.K., et al.
Veröffentlicht: (2013)

Current-field diagram of magnetic states of a surface spin valve in a point contact with a single ferromagnetic film
von: I. K. Yanson, et al.
Veröffentlicht: (2013)

Wear-resistant surfacing with feeding of nanooxides to weld pool
von: V. D. Kuznetsov
Veröffentlicht: (2015)

Calculation of the surface contact energy of components in quasibinary eutectic systems
von: D. A. Zakarjan
Veröffentlicht: (2014)

Increasing the stability of the process of surface heating of a plate by a moving plasma source
von: V. P. Lykhoshva, et al.
Veröffentlicht: (2022)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 3. Cutting-tool ceramic composites
von: V. I. Lavrinenko
Veröffentlicht: (2019)

Structure and properties of railway wheel surface after restoration surfacing and service loading
von: L. I. Markashova, et al.
Veröffentlicht: (2015)

Strengthening of the surface of steel (9XФМ) exposed to a high-current electron beam
von: Prokhorenko, E.M., et al.
Veröffentlicht: (2020)

On Control of a Wheeled Transport Robot with Two Steering Wheels
von: V. B. Larin
Veröffentlicht: (2017)

Fatigue life of steel specimens 40KH after wear-resistant surfacing with a sublayer of low-carbon steel
von: I. O. Riabtsev, et al.
Veröffentlicht: (2021)

Increase of wheel centers reliability
von: V. M. Kuzmichev, et al.
Veröffentlicht: (2012)

Formation of wear resistant structures in steels at discrete changes of their surfaces
von: M. V. Kindrachuk, et al.
Veröffentlicht: (2009)

Physical-chemical processes in castings with wear-resistant surface alloying
von: A. G. Kovalchuk, et al.
Veröffentlicht: (2018)