Cover Image

An increase of operating characteristics of cBN cutters by improving their damping properties

Saved in:

Bibliographic Details
Date:	2012
Main Authors:	L. N. Devin, A. A. Osadchij
Format:	Article
Language:	English
Published:	2012
Series:	Superhard Materials
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000696762
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Effect of damping properties of cutters on the probability of failure of the CBN plates
by: L. M. Devin, et al.
Published: (2016)

Damping properties RSBN composites of the cBN–Ti, cBN–Al–metal systems, in dependence from technological conditions of receipt
by: Ya. M. Romanenko, et al.
Published: (2017)

Study of cBN based composite cutters wearing and its influence on the fracture tool probability at the fine turning of the hardened steels
by: N. E. Stakhniv, et al.
Published: (2016)

Electrical characteristics of thermobaric sintered cBN–NbN composite
by: Yu. Yu. Rumiantseva, et al.
Published: (2020)

Фізико–механічні властивості надтвердих композитів систем cBN-Ті, cBN-Al, cBN-перехідний метал-Al, отриманих реакційним спіканням за високого тиску
by: Романенко, Я.М., et al.
Published: (2015)

cBN–Cu composite: production method and physical properties
by: M. V. Nikishina
Published: (2012)

Термобаричне спікання композиту cBN–Cr₃C₂
by: Сліпченко, К.В., et al.
Published: (2017)

The effect of charge grit on impact strength and damping characteristics of BN–Al composites
by: L. N. Devin, et al.
Published: (2020)

Investigation of the effect of cutting conditions on the roughness of a surface machined in fine turning of hardened steel by cutters of a cBN-based composite
by: N. E. Stakhniv
Published: (2013)

Thermobaric sintering of cBN-Cr3C2 composite
by: K. V. Slipchenko, et al.
Published: (2017)

Твердые растворы в системах cBN-Al и cBN-Al-TiB₂, полученные при высоких давлениях и температурах
by: Беженар, Н.П., et al.
Published: (2011)

HP-HT sintering of cBN based materials with ZrC and Al
by: K. V. Slipchenko, et al.
Published: (2020)

Features of the formation of the composite structure of cBN-TiC-Al system
by: M. P. Bezhenar, et al.
Published: (2019)

Dynamic tensile strength of ceramic-matrix composites of the BL group, which are obtained in the cBN–carbide–Al systems
by: D. A. Stratiichuk, et al.
Published: (2024)

cBN based materials with TiN-Al binder phase: sintering, structure, properties
by: K. V. Slipchenko, et al.
Published: (2019)

Композит cBN–Cu: метод получения и физические свойства
by: Никишина, М.В.
Published: (2012)

Sintering of cBN based materials with TaC binder for cutting tool application
by: K. V. Slipchenko, et al.
Published: (2020)

Study of the effect of the wear of a cutting tool from cBN-based composite on the probability of the tool fracture in finish turning of hardened steels
by: L. N. Devin, et al.
Published: (2012)

Моделювання пористої і зеренної структур при двостадійному спіканні надтвердих PCBN систем cBN – Al, cBN – TiB2 (TiN) – Al
by: Коновал, С.М., et al.
Published: (2008)

The influence of VC–Al additive on wear resistance of cBN-based composites
by: K. V. Slipchenko, et al.
Published: (2018)

Influence of reinforcement by the whiskers of Si₃N₄ and Mg₂B₂O₅ on the properties of cBN-based composites
by: Rumiantseva, Yu.Yu., et al.
Published: (2019)

HP-HT sintering, microstructure, and properties of B6O and TiC-containing composites based on cBN
by: D. V. Turkevich, et al.
Published: (2015)

Sintering of superhard cBN-based materials with Ti4WC5
by: D. A. Stratiichuk, et al.
Published: (2020)

Composites of the cBN–Si₃N₄ system reinforced by SiCw for turning tools
by: Osipov, A.S., et al.
Published: (2016)

The influence of SiC and Al2O3 whiskers on the properties of whisker-reinforced cBN-based composites
by: Ju. Ju. Rumjantseva, et al.
Published: (2019)

Релаксационное взаимодействие в системе cBN–Al при высоком давлении
by: Беженар, Н.П., et al.
Published: (2009)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
by: V. K. Starkov, et al.
Published: (2014)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
by: V. K. Starkov, et al.
Published: (2014)

Tool wear and tool life of PCBN, binderless cBN and wBN_cBN tools in continuous finish hard turning of cold work tool steel
by: V. M. Bushlja, et al.
Published: (2014)

Study of the effect of the wear of a cutting tool equipped with a plate of a cBN-based composite on its vibrations in finish turning of hardened steels
by: N. E. Stakhniv, et al.
Published: (2012)

Electrical resistance of the islet film of gold on the surface of thermobarically sintered cBN-ceramics
by: I. P. Fesenko, et al.
Published: (2021)

Influence of Sn and Bi additions on the structures and wear properties of Cu–Sn–P–Ce cBN tools
by: Han, P., et al.
Published: (2018)

Influence of Sn and Bi additions on the structures and wear properties of Cu–Sn–P–Ce cBN tools
by: P. Han, et al.
Published: (2018)

Фізико-хімічна взаємодія в системах cBN–ТіВ₂–Al, cBN–ZrN–Al під час спікання під високим тиском і властивості одержаних композитів
by: Гарбуз, Т.О., et al.
Published: (2007)

Спекание при высоких давлениях порошков cBN с добавками тугоплавких соединений
by: Беженар, Н.П., et al.
Published: (2007)

Исследование твердости и трещиностойкости PCBN, спеченного из порошков cBN, синтезированных из механически активированного hBN
by: Шульженко, А.А., et al.
Published: (2012)

Research of damping properties of materials on the base of MAKh phase of Ti3AlC2
by: A. V. Starosstina, et al.
Published: (2011)

Composites of the cBN–Si3N4 system reinforced by SiCw for turning tools
by: A. S. Osipov, et al.
Published: (2016)

Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
by: T. Zhao, et al.
Published: (2017)

Formation of multicomponent solid solutions in cBN—TiC— VN —Al system at high pressure composite sintering
by: N. M. Belyavina, et al.
Published: (2024)