Analysis of the scientific-technological solutions to reduce gas content in the iron melts with converter steel making
Gespeichert in:
| Datum: | 2012 |
|---|---|
| Hauptverfasser: | V. F. Poljakov, L. G. Tuboltsev, V. P. Korchenko, S. I. Semykin, N. I. Padun |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2012
|
| Schriftenreihe: | Fundamental and applied problems of ferrous metallurgy |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0000839349 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
Directions of scientific and technological research on reducing of saturation by gases of converter steel
von: V. F. Poljakov, et al.
Veröffentlicht: (2013)
von: V. F. Poljakov, et al.
Veröffentlicht: (2013)
Influence of technology options of smelting oxygen content in the iron-carbon melt
von: L. G. Tuboltsev, et al.
Veröffentlicht: (2015)
von: L. G. Tuboltsev, et al.
Veröffentlicht: (2015)
Behavior of oxygen and nitrogen in the melt during oxygen-converter heat
von: S. I. Semykin, et al.
Veröffentlicht: (2017)
von: S. I. Semykin, et al.
Veröffentlicht: (2017)
Study of the influence of technology BOF melt on quality steel
von: V. F. Poljakov, et al.
Veröffentlicht: (2014)
von: V. F. Poljakov, et al.
Veröffentlicht: (2014)
Analysis of the electrical characteristics of the converter when melting steel bath
von: S. I. Semykin, et al.
Veröffentlicht: (2015)
von: S. I. Semykin, et al.
Veröffentlicht: (2015)
Cluster model and behavior of oxygen in iron-carbon melt
von: L. G. Tuboltsev, et al.
Veröffentlicht: (2017)
von: L. G. Tuboltsev, et al.
Veröffentlicht: (2017)
The gas-saturation of metal in conditions of different technologies of basic oxygen process
von: V. P. Korchenko, et al.
Veröffentlicht: (2012)
von: V. P. Korchenko, et al.
Veröffentlicht: (2012)
Development and implementation of resource-saving technologies converter melting using electricity low power
von: S. I. Semykin, et al.
Veröffentlicht: (2014)
von: S. I. Semykin, et al.
Veröffentlicht: (2014)
Determination of coefficient of correlation between melting parameters and temperature of steel for BOF melting
von: A. A. Semikina, et al.
Veröffentlicht: (2013)
von: A. A. Semikina, et al.
Veröffentlicht: (2013)
Study and evaluation of sulfur exposure in the steel melt during the converter heat with highly desulfurized pig iron
von: B. V. Dvoskin, et al.
Veröffentlicht: (2017)
von: B. V. Dvoskin, et al.
Veröffentlicht: (2017)
Iron and steel Institute of the NAS. Scientific and technical support of black metallurgy
von: Babachenko, A.I., et al.
Veröffentlicht: (2017)
von: Babachenko, A.I., et al.
Veröffentlicht: (2017)
Iron and steel Institute of the NAS. Scientific and technical support of black metallurgy
von: A. I. Babachenko, et al.
Veröffentlicht: (2017)
von: A. I. Babachenko, et al.
Veröffentlicht: (2017)
Development of system of monitoring the technological process of steel melting in arc steel-making furnace
von: A. A. Trojanskij, et al.
Veröffentlicht: (2009)
von: A. A. Trojanskij, et al.
Veröffentlicht: (2009)
Influence of oxygen on the structure formation of liquid iron and liquid Fe-C alloys
von: V. S. Luchkin, et al.
Veröffentlicht: (2014)
von: V. S. Luchkin, et al.
Veröffentlicht: (2014)
Rational technology of preparation of iron for smelting of low-sulphur oxygen converter steel
von: A. S. Vergun, et al.
Veröffentlicht: (2012)
von: A. S. Vergun, et al.
Veröffentlicht: (2012)
Quality Index of Reducing Gas in Direct Iron Production Process
von: V. G. Kotov, et al.
Veröffentlicht: (2011)
von: V. G. Kotov, et al.
Veröffentlicht: (2011)
Historical landmarks of the Iron and Steel Institute
von: V. I. Bolshakov, et al.
Veröffentlicht: (2014)
von: V. I. Bolshakov, et al.
Veröffentlicht: (2014)
On the deep-bed filtration of water with high iron content
von: V. L. Poljakov
Veröffentlicht: (2015)
von: V. L. Poljakov
Veröffentlicht: (2015)
Assess on the possibilities to reduce dust emissions from the converter with the use of low-voltage potential
von: S. I. Semykin, et al.
Veröffentlicht: (2017)
von: S. I. Semykin, et al.
Veröffentlicht: (2017)
Working out and approbation of resource-saving technology of metal refinement at melting in the converter with low-voltage influences
von: T. S. Kijashko, et al.
Veröffentlicht: (2011)
von: T. S. Kijashko, et al.
Veröffentlicht: (2011)
High-voltage multiphase semiconductor converters with reduced energy accumulation for gas-discharge installations
von: V. V. Martynov, et al.
Veröffentlicht: (2018)
von: V. V. Martynov, et al.
Veröffentlicht: (2018)
Common factors of changes in slag composition and sulfur content in cast iron in the technological chain blast furnace - cast iron desulfurization complex - converter
von: A. P. Shevchenko, et al.
Veröffentlicht: (2022)
von: A. P. Shevchenko, et al.
Veröffentlicht: (2022)
Experience and prospects for the development of scientific topics at Iron and Steel Institute of Z. I. Nekrasov of the NAS of Ukraine
von: A. I. Babachenko, et al.
Veröffentlicht: (2019)
von: A. I. Babachenko, et al.
Veröffentlicht: (2019)
Analysis of the status and application prospects technology liquid-phase reduction manganese from oxide materials at melting converter
von: Ja. A. Poljakova, et al.
Veröffentlicht: (2014)
von: Ja. A. Poljakova, et al.
Veröffentlicht: (2014)
Direct observation of high-temperature areas of metal melt at oxygen converter blowing with low voltage application
von: S. I. Semykin, et al.
Veröffentlicht: (2021)
von: S. I. Semykin, et al.
Veröffentlicht: (2021)
Experimental studies of the of electrical effects influence on iron melt when his external refining with granulated magnesium
von: S. I. Semykin, et al.
Veröffentlicht: (2013)
von: S. I. Semykin, et al.
Veröffentlicht: (2013)
Frequency Converter with the Reduced THD of the Output Voltage
von: G. V. Pavlov, et al.
Veröffentlicht: (2016)
von: G. V. Pavlov, et al.
Veröffentlicht: (2016)
Carbon Nanomaterial Formation at the Processing of Fresh-Reduced Iron by Products of Natural Gas Conversion
von: A. A. Nebesnyj, et al.
Veröffentlicht: (2015)
von: A. A. Nebesnyj, et al.
Veröffentlicht: (2015)
Development and implementation of new industrial steel technology scientists Iron and Steel Institute National Academy of Sciences of Ukraine
von: V. I. Bolshakov, et al.
Veröffentlicht: (2013)
von: V. I. Bolshakov, et al.
Veröffentlicht: (2013)
Mechanism of temperature distributing in the streams of steel and cast-iron fusions at the making of the bimetallic casting
von: Ju. N. Romanenko, et al.
Veröffentlicht: (2009)
von: Ju. N. Romanenko, et al.
Veröffentlicht: (2009)
Aspects of application of molten cast iron in arc steel melting furnaces
von: R. V. Sinjakov
Veröffentlicht: (2012)
von: R. V. Sinjakov
Veröffentlicht: (2012)
The Prediction of Reducing Gas Specific Consumption for Iron Direct Production Process in Shaft Furnaces
von: V. G. Kotov, et al.
Veröffentlicht: (2012)
von: V. G. Kotov, et al.
Veröffentlicht: (2012)
Iron and steel institute. Results of the 2012 and the aims of development
von: V. I. Bolshakov, et al.
Veröffentlicht: (2012)
von: V. I. Bolshakov, et al.
Veröffentlicht: (2012)
About the effect of technological factors on nitrogen content in steel melted in super-powerful arc furnace
von: E. L. Korzun, et al.
Veröffentlicht: (2010)
von: E. L. Korzun, et al.
Veröffentlicht: (2010)
Results Iron and Steel Institute of NAS of Ukraine in 2010 - 2015
von: A. I. Babachenko, et al.
Veröffentlicht: (2015)
von: A. I. Babachenko, et al.
Veröffentlicht: (2015)
Significant technology of desulfurization and degassing pig iron dispersed by treating it with magnesium injected to the melt in the gas jet
von: A. S. Vergun, et al.
Veröffentlicht: (2015)
von: A. S. Vergun, et al.
Veröffentlicht: (2015)
Creative way of the Iron and Steel Institute of NAS of Ukraine. 80 years
von: A. I. Babachenko, et al.
Veröffentlicht: (2019)
von: A. I. Babachenko, et al.
Veröffentlicht: (2019)
Investigation of the effect of silicon content in iron and its temperature on exergy indicators of the blast furnace-converter system
von: A. L. Chajka, et al.
Veröffentlicht: (2018)
von: A. L. Chajka, et al.
Veröffentlicht: (2018)
The steel industry of Ukraine as the core economic sectors (2015)
von: L. G. Tuboltsev, et al.
Veröffentlicht: (2015)
von: L. G. Tuboltsev, et al.
Veröffentlicht: (2015)
Plasticity of parahydrogen with reduced deuterium contents
von: Alekseeva, L.A.
Veröffentlicht: (2007)
von: Alekseeva, L.A.
Veröffentlicht: (2007)
Ähnliche Einträge
-
Directions of scientific and technological research on reducing of saturation by gases of converter steel
von: V. F. Poljakov, et al.
Veröffentlicht: (2013) -
Influence of technology options of smelting oxygen content in the iron-carbon melt
von: L. G. Tuboltsev, et al.
Veröffentlicht: (2015) -
Behavior of oxygen and nitrogen in the melt during oxygen-converter heat
von: S. I. Semykin, et al.
Veröffentlicht: (2017) -
Study of the influence of technology BOF melt on quality steel
von: V. F. Poljakov, et al.
Veröffentlicht: (2014) -
Analysis of the electrical characteristics of the converter when melting steel bath
von: S. I. Semykin, et al.
Veröffentlicht: (2015)