Buchumschlag

The influence of the working layer thickness on the properties of hot-pressed powder layered composites

Gespeichert in:

Bibliographische Detailangaben
Datum:	2011
Hauptverfasser:	H. A. Bahliuk, S. H. Napara-Volhina, L. M. Orlova, V. K. Kud
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2011
Schriftenreihe:	Materials Science (Physicochemical mechanics of materials)
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000658215
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Physical and mechanical properties and structure of boron containing powder steels with high carbon contents
von: S. H. Napara-Volhina, et al.
Veröffentlicht: (2009)

The influence of hot stamping on elastic properties and anisotropy of titanium-based powder composites
von: H. A. Bahliuk, et al.
Veröffentlicht: (2021)

The structure, physical-mechanical and frictional properties of Fe - Sі - B - C system sintered steels
von: H. A. Bahliuk, et al.
Veröffentlicht: (2013)

Conductivity of pressed powders of chromium dioxide with spin-dependent electron tunneling: the effect of thickness and composition of dielectric layers
von: N. V. Dalakova, et al.
Veröffentlicht: (2019)

The SrB2 powder influence on physicomechanical properties of Fe–Cu–Ni–Sn composites sintered by vacuum hot pressing
von: V. A. Mechnyk, et al.
Veröffentlicht: (2020)

The influence of hot isostatic pressing on the structure and mechanical properties of nickel heatproof alloys
von: O. S. Serhiienko, et al.
Veröffentlicht: (2011)

Research of the influence of siliconizing on the structure and properties of hot-pressed polycrystalline silicon carbide
von: V. V. Ivzhenko, et al.
Veröffentlicht: (2018)

Features of influence of VN additive on the structure and properties of Fe-Cu-Ni-Sn composite produced by hot pressing
von: V. A. Mechnik, et al.
Veröffentlicht: (2018)

Microstructure and properties of aluminum composites with carbide-containing master alloy and titanium carbide prepared by hot-forging
von: Yu. O. Shyshkina, et al.
Veröffentlicht: (2018)

Research of the influence of silicon impregnation on the structure and properties of hot-pressed silicon carbide
von: V. V. Ivzhenko, et al.
Veröffentlicht: (2017)

Influence of a near-electrode layer thickness on the diffusion impedance
von: V. V. Pototska, et al.
Veröffentlicht: (2018)

The mechanical properties of powder material Ti46Nb4Ta4Al46 obtained by pulsed hot pressing
von: Yu. M. Podrezov, et al.
Veröffentlicht: (2014)

Microstructure and wear properties of Ni–Ni3Si composites prepared by mechanical alloying and hot pressing sintering
von: J. Zhang, et al.
Veröffentlicht: (2020)

Structure and compositional properties diamond materials (Fe-Cu-Ni-Sn) obtained by hot pressing
von: E. S. Hevorkian, et al.
Veröffentlicht: (2015)

Thick layers liquid-phase epitaxy method
von: S. N. Dranchuk, et al.
Veröffentlicht: (2013)

Phase formation and physical and mechanical properties of Fe–Cu–Ni–Sn–VN composites sintered by vacuum hot pressing for diamond stone-working tools
von: V. A. Mechnyk, et al.
Veröffentlicht: (2022)

Development of surfacing technology for the working layer of variable composition on the blooming rolls
von: L. K. Leshchynskyi, et al.
Veröffentlicht: (2021)

On integral model of transverse dynamic displacements of thick elastic layer
von: V. A. Stojan, et al.
Veröffentlicht: (2013)

First Basic Problem of Elasticity Theory for a Composite Layer with Two Thick-Walled Tubes
von: Деньщиков, О. Ю., et al.
Veröffentlicht: (2025)

First Basic Problem of Elasticity Theory for a Composite Layer with Two Thick-Walled Tubes
von: Деньщиков, О. Ю., et al.
Veröffentlicht: (2025)

Allowable deviation of LC layer thickness in cholesteric LCDs
von: Rybalochka, A., et al.
Veröffentlicht: (2002)

Surface plasmon polaritons in dielectric/metal/dielectric structures: metal layer thickness influence
von: P. Kostrobij, et al.
Veröffentlicht: (2019)

Studying the Influence of Orientation and Layer Thickness on the Physico-Mechanical Properties of Co-Cr-Mo Alloy Manufactured by the SLM Method
von: S. Adjamskiy, et al.
Veröffentlicht: (2022)

Superconducting and normal properties of the set of Mo/Si superlattices with variable Si layer thickness
von: Mikhailov, M.Yu., et al.
Veröffentlicht: (1999)

Surface layers and thickness dependences of the thermoelectric properties of the steam-phase condensates of the last on the sieve
von: D. M. Freik, et al.
Veröffentlicht: (2015)

Thermal conductivity of hot-pressed AlB12–AlN ceramic composite
von: T. O. Prikhna, et al.
Veröffentlicht: (2024)

Peculiarities of obtaining diamond-(Fe-Cu-Ni-Sn) composite materials by hot pressing
von: Gevorkyan, E., et al.
Veröffentlicht: (2017)

The impact of material and thickness of the separation layer on the structure condensates Cu-Mo
von: V. H. Hrechaniuk, et al.
Veröffentlicht: (2016)

Composites based on cBN micron powders structured by carbon binder for the application as functional elements in the working layer of diamond–abrasive tools. Part 1. Composite grits as abrasive elements
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2014)

The influence of electrolyte composition for hard anodizing of aluminium on oxide layer characteristics
von: M. M. Student, et al.
Veröffentlicht: (2021)

Measurement of thicknesses of optically transparent layered structures by the spectral interferometry method
von: K. A. Lukin, et al.
Veröffentlicht: (2017)

Composite materials of diamond−(Co–Cu–Sn) system with improved mechanical characteristics. Part 1. The influence of hot re-pressing on the structure and properties of diamond−(Co–Cu–Sn) composite
von: M. V. Novikov, et al.
Veröffentlicht: (2015)

Structure and properties of WC–Co composites sintered by vacuum hot pressing with different CrB2 content for drill bits
von: B. T. Ratov, et al.
Veröffentlicht: (2021)

Cold pressing of ferroelectric-ferromagnetic layered composites for nonlinear forming lines of high-voltage impulse generators
von: Rezinkin, O.L., et al.
Veröffentlicht: (2017)

The structure of the chromium carbide steel that obtained by hot pressing
von: O. M. Shevchenko
Veröffentlicht: (2015)

Structure and properties of hot-pressed materials based on AlB12C2
von: T. A. Prikhna, et al.
Veröffentlicht: (2017)

The influence of phase composition of deposited layers of hydrocylinder rods on their local corrosion
von: A. A. Holiakevych, et al.
Veröffentlicht: (2014)

The influence of pretreatment in electrolyte plasma on composition and properties of the boride layer under multicomponent saturation of steel
von: L. I. Fedorenkova
Veröffentlicht: (2021)

Formation of Fe-Cu-Ni-Sn-VN nanocrystalline matrix by vacuum hot pressing for diamond-containing composite. mechanical and tribological properties
von: V. A. Mechnik, et al.
Veröffentlicht: (2019)

Phase formation and physical-mechanical properties of WC–Co–CrB2 composites sintered by vacuum hot pressing for drill tools
von: B. T. Ratov, et al.
Veröffentlicht: (2022)