Modeling of the abrasive wear of convective heat transfer surfaces of a boiler
We analyze statistical data on the damages of convective heat transfer surfaces of boilers of Ukrainian thermal power plants for recent years. A model of the turbulent flow of a two-phase mixture about heat transfer surfaces has been developed, and numerical investigations of the process of flow of...
Gespeichert in:
| Datum: | 2008 |
|---|---|
| Hauptverfasser: | Shraiber O.A., Yatsenko V.P. |
| Format: | Artikel |
| Sprache: | Ukrainisch |
| Veröffentlicht: |
General Energy Institute of the National Academy of Sciences of Ukraine
2008
|
| Schlagworte: | |
| Online Zugang: | https://systemre.org/index.php/journal/article/view/333 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | System Research in Energy |
Institution
System Research in EnergyÄhnliche Einträge
An engineering method for calculating the abrasive wear of heat-transfer surfaces of a boiler
von: Yatsenko V.P., et al.
Veröffentlicht: (2009)
von: Yatsenko V.P., et al.
Veröffentlicht: (2009)
On the prediction of erosive wear of the heat-transfer surfaces of boiler equipment
von: Yatsenko V.P.
Veröffentlicht: (2006)
von: Yatsenko V.P.
Veröffentlicht: (2006)
Heat recovery of the waste gas boilers, in combined heat and mass transfer apparatus
von: Tuz V.E., et al.
Veröffentlicht: (2011)
von: Tuz V.E., et al.
Veröffentlicht: (2011)
Heat transfer of a liquid film flowing over a flat surface with spherical indentations with air
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2008)
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2008)
Analysis of the slagging and polluting properties of individual coal fuel and its mixtures
von: Yatsenko V.P.
Veröffentlicht: (2007)
von: Yatsenko V.P.
Veröffentlicht: (2007)
High-efficiency heat-exchange surface for film processes
von: Dubrovskyi V.V.
Veröffentlicht: (2017)
von: Dubrovskyi V.V.
Veröffentlicht: (2017)
Usage the transfer properties in heating and evaporable cooling of the fluid film during design stage of heat and mass exchangers
von: Tuz V.E., et al.
Veröffentlicht: (2014)
von: Tuz V.E., et al.
Veröffentlicht: (2014)
Heat transfer on profiled surfaces of industrial film-type cooling towers
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2014)
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2014)
Mantle heat flow in the territory of Ukraine
von: Gordienko, V.V., et al.
Veröffentlicht: (2025)
von: Gordienko, V.V., et al.
Veröffentlicht: (2025)
Heat transfer between liquid and air on surface with different shape of dimples
von: Dubrovskyi V.V.
Veröffentlicht: (2016)
von: Dubrovskyi V.V.
Veröffentlicht: (2016)
Determination of the optimal conditions of the work of a Venturi scrubber for gas cleaning from solid particles
von: Shraiber O.A., et al.
Veröffentlicht: (2016)
von: Shraiber O.A., et al.
Veröffentlicht: (2016)
Influence of the relative velocity between water and air on their heat transfer at the flow of a film along a profiled surface
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2012)
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2012)
DETERMINATION HEAT TRANSFER COEFFICIENTS UV AND UV FOR PV PLANT`S MODELING USING PVSYST SOFTWARE
von: Bordakov, M.
Veröffentlicht: (2021)
von: Bordakov, M.
Veröffentlicht: (2021)
Analysis of technical requirements for heating mains in geothermal heating supply systems
von: Oliinichenko, V.
Veröffentlicht: (2016)
von: Oliinichenko, V.
Veröffentlicht: (2016)
Increasing the efficiency of industrial mazut-gas boilers
von: Tuz V.E., et al.
Veröffentlicht: (2011)
von: Tuz V.E., et al.
Veröffentlicht: (2011)
Influence of the Nonuniformity Distribution of Irrigation Density in a Hollow Scrubber on the Efficiency of Cleaning Flue Gases From Solid Particles
von: Shraiber O.A., et al.
Veröffentlicht: (2015)
von: Shraiber O.A., et al.
Veröffentlicht: (2015)
Heat and mass transfer in the heated from below free cylindrical elementary convection cell with a conical cavity bottom
von: Бозбей, Л. С., et al.
Veröffentlicht: (2016)
von: Бозбей, Л. С., et al.
Veröffentlicht: (2016)
Heat and mass transfer in the heated from below free cylindrical elementary convection cell with a conical cavity bottom
von: Бозбей, Л. С., et al.
Veröffentlicht: (2016)
von: Бозбей, Л. С., et al.
Veröffentlicht: (2016)
Heat transfer in film-type cooling towers with a profiled surface of sprinklers under conditions of the longitudinal and cross direction of air flow
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2014)
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2014)
Computer modeling of the erosion of the convection heat transfer surfaces of boiler tpp 312
von: S. H. Kobzar, et al.
Veröffentlicht: (2017)
von: S. H. Kobzar, et al.
Veröffentlicht: (2017)
Sedimentation of ash particles on spherical collectors in devices for the scrubbing of effluent gases
von: Yatsenko V.P.
Veröffentlicht: (2012)
von: Yatsenko V.P.
Veröffentlicht: (2012)
Influence of the geometrical characteristics of the surface with spherical wells on heat exchange of water and air
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2015)
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2015)
Coatings properties Cr-Si-B-MgC2 in high conditions temperatures
von: Shchepetov , Vitalii, et al.
Veröffentlicht: (2022)
von: Shchepetov , Vitalii, et al.
Veröffentlicht: (2022)
Formation of nanogetherogenic materials with increased characteristics of heat resistance
von: Shchepetov , Vitalii, et al.
Veröffentlicht: (2022)
von: Shchepetov , Vitalii, et al.
Veröffentlicht: (2022)
ANALYSIS OF THE DEPENDENCE OF THE BOILER'S ENERGY EFFICIENCY ON THE SOOT LAYER THICKNESS DEPOSITED ON ITS HEAT EXCHANGE SURFACE
von: Surzhyk , O.
Veröffentlicht: (2025)
von: Surzhyk , O.
Veröffentlicht: (2025)
R-functions and chevron surfaces in machine building
von: Шейко, Т. И., et al.
Veröffentlicht: (2017)
von: Шейко, Т. И., et al.
Veröffentlicht: (2017)
R-functions and chevron surfaces in machine building
von: Шейко, Т. И., et al.
Veröffentlicht: (2017)
von: Шейко, Т. И., et al.
Veröffentlicht: (2017)
Possibility of Enhancing the Efficiency of Operation of Film Cooling Towers by Means of the Use of Sprinklers with Profiled Surface
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2011)
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2011)
Determination of the economical efficiency of schemes of thermochemical recuperation for heat engines
von: Shraiber O.A.
Veröffentlicht: (2018)
von: Shraiber O.A.
Veröffentlicht: (2018)
Influence of operating conditions on the efficiency of the wet cleaning of flue gases from ash particles
von: Fedinchyk I.V.
Veröffentlicht: (2013)
von: Fedinchyk I.V.
Veröffentlicht: (2013)
Numerical investigation of the features of the wet cleaningof gas in Venturi scrubber
von: Fedinchyk I.V.
Veröffentlicht: (2014)
von: Fedinchyk I.V.
Veröffentlicht: (2014)
On the possibility of enrichment of solid fuel with a high ash content in an apparatus with fluidized bed
von: Yatsenko V.P.
Veröffentlicht: (2001)
von: Yatsenko V.P.
Veröffentlicht: (2001)
Optimal parameters for extracting exhaust gas heat from boilers to be used by heat pump
von: Dubovskoy S.V., et al.
Veröffentlicht: (2013)
von: Dubovskoy S.V., et al.
Veröffentlicht: (2013)
Elementary convective cell in incompressible viscous fluid and its parameters
von: Бозбей, Л. С., et al.
Veröffentlicht: (2016)
von: Бозбей, Л. С., et al.
Veröffentlicht: (2016)
Elementary convective cell in incompressible viscous fluid and its parameters
von: Бозбей, Л. С., et al.
Veröffentlicht: (2016)
von: Бозбей, Л. С., et al.
Veröffentlicht: (2016)
Mapping of Western Siberian heat flow (southeast)
von: Isaev, V. I., et al.
Veröffentlicht: (2022)
von: Isaev, V. I., et al.
Veröffentlicht: (2022)
Crustal heat flow in Ukraine
von: Gordienko, V.V., et al.
Veröffentlicht: (2025)
von: Gordienko, V.V., et al.
Veröffentlicht: (2025)
Kriging of Ukraine’s deep heat flow map
von: Gordienko, V.V., et al.
Veröffentlicht: (2022)
von: Gordienko, V.V., et al.
Veröffentlicht: (2022)
Нанокомпозиційні покриття для захисту від зношування в умовах високих температур
von: Shchepetov, Vitalii, et al.
Veröffentlicht: (2024)
von: Shchepetov, Vitalii, et al.
Veröffentlicht: (2024)
Using the enthalpy of cooling of the high-temperature elements of thermal plants by the method of thermochemical recuperation (thermochemical protection)
von: Shraiber O.A.
Veröffentlicht: (2016)
von: Shraiber O.A.
Veröffentlicht: (2016)
Ähnliche Einträge
-
An engineering method for calculating the abrasive wear of heat-transfer surfaces of a boiler
von: Yatsenko V.P., et al.
Veröffentlicht: (2009) -
On the prediction of erosive wear of the heat-transfer surfaces of boiler equipment
von: Yatsenko V.P.
Veröffentlicht: (2006) -
Heat recovery of the waste gas boilers, in combined heat and mass transfer apparatus
von: Tuz V.E., et al.
Veröffentlicht: (2011) -
Heat transfer of a liquid film flowing over a flat surface with spherical indentations with air
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2008) -
Analysis of the slagging and polluting properties of individual coal fuel and its mixtures
von: Yatsenko V.P.
Veröffentlicht: (2007)