Heat recovery of the waste gas boilers, in combined heat and mass transfer apparatus
Promising direction in energy saving is to increase the efficiency of usage of hydrocarbon fuel in the boilers at the expense of deep heat utilization, ie, using the heat of condensation of water vapor. The most optimal disposal system is a system that combines heat exchangers of two types: surface...
Saved in:
| Date: | 2011 |
|---|---|
| Main Authors: | Tuz V.E., Trokoz Ya.E., Lebed N.L. |
| Format: | Article |
| Language: | Ukrainian |
| Published: |
General Energy Institute of the National Academy of Sciences of Ukraine
2011
|
| Subjects: | |
| Online Access: | https://systemre.org/index.php/journal/article/view/410 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | System Research in Energy |
Institution
System Research in EnergySimilar Items
Increasing the efficiency of industrial mazut-gas boilers
by: Tuz V.E., et al.
Published: (2011)
by: Tuz V.E., et al.
Published: (2011)
Usage the transfer properties in heating and evaporable cooling of the fluid film during design stage of heat and mass exchangers
by: Tuz V.E., et al.
Published: (2014)
by: Tuz V.E., et al.
Published: (2014)
Dynamics of interaction of fluid film and gas flow in the uptakes of the heat and mass exchange equipment GTU of the compressor stations
by: Tuz V.E., et al.
Published: (2009)
by: Tuz V.E., et al.
Published: (2009)
High-efficiency heat-exchange surface for film processes
by: Dubrovskyi V.V.
Published: (2017)
by: Dubrovskyi V.V.
Published: (2017)
Heat Transfer During Subcooled Boiling in Tubes (A Review)
by: Gakal, P.G., et al.
Published: (2019)
by: Gakal, P.G., et al.
Published: (2019)
Method for the Optimal Design of Vacuum-Evaporative Heat Pumps
by: Kuznetsov, M.A., et al.
Published: (2019)
by: Kuznetsov, M.A., et al.
Published: (2019)
Mantle heat flow in the territory of Ukraine
by: Gordienko, V.V., et al.
Published: (2025)
by: Gordienko, V.V., et al.
Published: (2025)
Analysis of technical requirements for heating mains in geothermal heating supply systems
by: Oliinichenko, V.
Published: (2016)
by: Oliinichenko, V.
Published: (2016)
An engineering method for calculating the abrasive wear of heat-transfer surfaces of a boiler
by: Yatsenko V.P., et al.
Published: (2009)
by: Yatsenko V.P., et al.
Published: (2009)
Problems of creating scientific and methodological bases of spent nuclear fuel dry cask storage thermal safety in Ukraine
by: Alyokhina, S.V.
Published: (2018)
by: Alyokhina, S.V.
Published: (2018)
Analytical Method of Profiling Axial-Radial Compressor Impellers
by: Rusanov, A.V., et al.
Published: (2018)
by: Rusanov, A.V., et al.
Published: (2018)
Modeling of the abrasive wear of convective heat transfer surfaces of a boiler
by: Shraiber O.A., et al.
Published: (2008)
by: Shraiber O.A., et al.
Published: (2008)
Calculation of liquid cooling in film cooling towers with a profiled sprinkler surface
by: Dubrovskyi V.V.
Published: (2017)
by: Dubrovskyi V.V.
Published: (2017)
Optimal parameters for extracting exhaust gas heat from boilers to be used by heat pump
by: Dubovskoy S.V., et al.
Published: (2013)
by: Dubovskoy S.V., et al.
Published: (2013)
Heat transfer on profiled surfaces of industrial film-type cooling towers
by: Dubrovskyi V.V., et al.
Published: (2014)
by: Dubrovskyi V.V., et al.
Published: (2014)
Temperatures of the tectonosphere of Ukraine
by: Gordienko, Vadim, et al.
Published: (2025)
by: Gordienko, Vadim, et al.
Published: (2025)
Influence of the geometrical characteristics of the surface with spherical wells on heat exchange of water and air
by: Dubrovskyi V.V., et al.
Published: (2015)
by: Dubrovskyi V.V., et al.
Published: (2015)
HEAT EXCHANGE DURING THE MOVEMENT OF THE GEOTHERMAL HEAT CARRIER IN THE WELL
by: Morozov, Y., et al.
Published: (2022)
by: Morozov, Y., et al.
Published: (2022)
Heat transfer between liquid and air on surface with different shape of dimples
by: Dubrovskyi V.V.
Published: (2016)
by: Dubrovskyi V.V.
Published: (2016)
Influence of eccentricity on heat transfer in borehole counterflow heat exchanger of tube-in-tube type
by: Бучко, А. В., et al.
Published: (2016)
by: Бучко, А. В., et al.
Published: (2016)
Influence of eccentricity on heat transfer in borehole counterflow heat exchanger of tube-in-tube type
by: Бучко, А. В., et al.
Published: (2016)
by: Бучко, А. В., et al.
Published: (2016)
ANALYSIS OF THE DEPENDENCE OF THE BOILER'S ENERGY EFFICIENCY ON THE SOOT LAYER THICKNESS DEPOSITED ON ITS HEAT EXCHANGE SURFACE
by: Surzhyk , O.
Published: (2025)
by: Surzhyk , O.
Published: (2025)
ANALYSIS OF METHODS OF THERMAL TRANSFER INTENSIFICATION IN SOLAR COLLECTORS US-ING FREE HEAT TRANSFER FLUID CIRCULATION MODE
by: Golovko , V., et al.
Published: (2024)
by: Golovko , V., et al.
Published: (2024)
Heat transfer of a liquid film flowing over a flat surface with spherical indentations with air
by: Dubrovskyi V.V., et al.
Published: (2008)
by: Dubrovskyi V.V., et al.
Published: (2008)
INFLUENCE OF GROUNDWATER FILTRATION FLOW ON THE THERMAL EFFICIENCY OF UNDERGROUND HEAT EXCHANGER
by: Basok, B., et al.
Published: (2022)
by: Basok, B., et al.
Published: (2022)
DETERMINATION HEAT TRANSFER COEFFICIENTS UV AND UV FOR PV PLANT`S MODELING USING PVSYST SOFTWARE
by: Bordakov, M.
Published: (2021)
by: Bordakov, M.
Published: (2021)
PROSPECTS FOR THE APPLICATION OF THERMOELECTRIC HEAT PUMPS IN LOW-TEMPERATURE DISTRICT HEATING SYSTEMS
by: Lobunets , Yu.
Published: (2025)
by: Lobunets , Yu.
Published: (2025)
THE SCIENTIFIC FOUNDATIONS OF MOISTURE AND HEAT EXCHANGE UNDER THE CONDITIONS OF CAVE COMPLEX OF KYIV PECHERSK LAVRA
by: Sitnikov, A.B.
Published: (2014)
by: Sitnikov, A.B.
Published: (2014)
Influence of the relative velocity between water and air on their heat transfer at the flow of a film along a profiled surface
by: Dubrovskyi V.V., et al.
Published: (2012)
by: Dubrovskyi V.V., et al.
Published: (2012)
METHOD FOR DETERMINING AVERAGE VOLUME PARAMETERS OF THE DYNAMICS OF THE ELECTROTHERMAL STATE OF MEDIA USING THE GAUSS – OSTROGRADSKY THEOREM
by: Matiakh, S., et al.
Published: (2024)
by: Matiakh, S., et al.
Published: (2024)
ANALYSIS OF CHANGES IN HEAT OUTPUT FROM RADIATORS DURING THE SWITCH TO LOW-TEMPERATURE HEATING USING GEOTHERMAL ENERGY
by: Lysak , O.
Published: (2025)
by: Lysak , O.
Published: (2025)
The heat transfer processes in the heat exchange unit of combined photoenergy system
by: Zaitsev, R.
Published: (2017)
by: Zaitsev, R.
Published: (2017)
Overview of low grade heat sources for heat pump plants in district heating systems
by: Derii V.O., et al.
Published: (2022)
by: Derii V.O., et al.
Published: (2022)
Heat and mass transfer in the heated from below free cylindrical elementary convection cell with a conical cavity bottom
by: Бозбей, Л. С., et al.
Published: (2016)
by: Бозбей, Л. С., et al.
Published: (2016)
Heat and mass transfer in the heated from below free cylindrical elementary convection cell with a conical cavity bottom
by: Бозбей, Л. С., et al.
Published: (2016)
by: Бозбей, Л. С., et al.
Published: (2016)
Estimation of the potential of low grade heat sources for heat pump plants in district heating systems
by: Derii , Volodymyr, et al.
Published: (2022)
by: Derii , Volodymyr, et al.
Published: (2022)
Determination of the economical efficiency of schemes of thermochemical recuperation for heat engines
by: Shraiber O.A.
Published: (2018)
by: Shraiber O.A.
Published: (2018)
EFFICIENCY OF THE BUFFER ACCUMULATOR OF THE HYDROTHERMAL HEAT PUMP SYSTEM AS A HEAT ENERGY ACCUMULATOR
by: Zurian, О., et al.
Published: (2023)
by: Zurian, О., et al.
Published: (2023)
THE METHODICAL ASPECTS OF VALIDITY ASSESGMENT FOR HEAT-MOISTURE EXCHANGE STUDIES (AS AN EXAMPLE THE COMPLEX OF KYIV PECHERSK LAVRA)
by: Sitnikov, A.B.
Published: (2015)
by: Sitnikov, A.B.
Published: (2015)
R-functions and chevron surfaces in machine building
by: Шейко, Т. И., et al.
Published: (2017)
by: Шейко, Т. И., et al.
Published: (2017)
Similar Items
-
Increasing the efficiency of industrial mazut-gas boilers
by: Tuz V.E., et al.
Published: (2011) -
Usage the transfer properties in heating and evaporable cooling of the fluid film during design stage of heat and mass exchangers
by: Tuz V.E., et al.
Published: (2014) -
Dynamics of interaction of fluid film and gas flow in the uptakes of the heat and mass exchange equipment GTU of the compressor stations
by: Tuz V.E., et al.
Published: (2009) -
High-efficiency heat-exchange surface for film processes
by: Dubrovskyi V.V.
Published: (2017) -
Heat Transfer During Subcooled Boiling in Tubes (A Review)
by: Gakal, P.G., et al.
Published: (2019)