Buchumschlag

High-efficiency heat-exchange surface for film processes

We have proposed to introduce a new profiled surface with spherical dimples, which is characterized by a high-efficiency heat transfer from a flowing down liquid film to surrounding air. Such a surface can be used for heat exchangers of contact type. The characteristics of such surfaces are based on...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
1. Verfasser:	Dubrovskyi V.V.
Format:	Artikel
Sprache:	Ukrainisch
Veröffentlicht:	General Energy Institute of the National Academy of Sciences of Ukraine 2017
Schlagworte:	profiled surface heat transfer film processes.
Online Zugang:	https://systemre.org/index.php/journal/article/view/633
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	System Research in Energy

Institution

System Research in Energy

Ähnliche Einträge

Influence of the geometrical characteristics of the surface with spherical wells on heat exchange of water and air
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2015)

Heat transfer on profiled surfaces of industrial film-type cooling towers
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2014)

Possibility of Enhancing the Efficiency of Operation of Film Cooling Towers by Means of the Use of Sprinklers with Profiled Surface
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2011)

Heat transfer of a liquid film flowing over a flat surface with spherical indentations with air
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2008)

Calculation of liquid cooling in film cooling towers with a profiled sprinkler surface
von: Dubrovskyi V.V.
Veröffentlicht: (2017)

Heat transfer between liquid and air on surface with different shape of dimples
von: Dubrovskyi V.V.
Veröffentlicht: (2016)

Influence of the relative velocity between water and air on their heat transfer at the flow of a film along a profiled surface
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2012)

Usage the transfer properties in heating and evaporable cooling of the fluid film during design stage of heat and mass exchangers
von: Tuz V.E., et al.
Veröffentlicht: (2014)

Heat transfer in film-type cooling towers with a profiled surface of sprinklers under conditions of the longitudinal and cross direction of air flow
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2014)

An engineering method for calculating the abrasive wear of heat-transfer surfaces of a boiler
von: Yatsenko V.P., et al.
Veröffentlicht: (2009)

Heat recovery of the waste gas boilers, in combined heat and mass transfer apparatus
von: Tuz V.E., et al.
Veröffentlicht: (2011)

High-efficiency heat-exchange surface for film processes
von: V. V. Dubrovskyi
Veröffentlicht: (2017)

Modeling of the abrasive wear of convective heat transfer surfaces of a boiler
von: Shraiber O.A., et al.
Veröffentlicht: (2008)

Increasing the efficiency of industrial mazut-gas boilers
von: Tuz V.E., et al.
Veröffentlicht: (2011)

Формирование слоистой структуры в плёнках никеля при электроосаждении импульсным током
von: Штапенко, Э.Ф., et al.
Veröffentlicht: (2019)

Повышение качества поверхностных электроэрозионно-легированных слоёв комбинированными покрытиями и поверхностным пластическим деформированием. I. Особенности формирования комбинированных электроэрозионных покрытий на специальных сталях и сплавах
von: Тарельник, В.Б., et al.
Veröffentlicht: (2019)

Analysis of technical requirements for heating mains in geothermal heating supply systems
von: Oliinichenko, V.
Veröffentlicht: (2016)

ANALYSIS OF THE DEPENDENCE OF THE BOILER'S ENERGY EFFICIENCY ON THE SOOT LAYER THICKNESS DEPOSITED ON ITS HEAT EXCHANGE SURFACE
von: Surzhyk , O.
Veröffentlicht: (2025)

R-functions and chevron surfaces in machine building
von: Шейко, Т. И., et al.
Veröffentlicht: (2017)

R-functions and chevron surfaces in machine building
von: Шейко, Т. И., et al.
Veröffentlicht: (2017)

A film-type cooling tower with a profiled sprinklers surface
von: Dubrovskyi V.V.
Veröffentlicht: (2016)

Mantle heat flow in the territory of Ukraine
von: Gordienko, V.V., et al.
Veröffentlicht: (2025)

Dynamics of interaction of fluid film and gas flow in the uptakes of the heat and mass exchange equipment GTU of the compressor stations
von: Tuz V.E., et al.
Veröffentlicht: (2009)

DETERMINATION HEAT TRANSFER COEFFICIENTS UV AND UV FOR PV PLANT`S MODELING USING PVSYST SOFTWARE
von: Bordakov, M.
Veröffentlicht: (2021)

Structural investigations of photosensitive composites «Au Nps/Selenium film»
von: Рубіш, В. М., et al.
Veröffentlicht: (2020)

HEAT EXCHANGE DURING THE MOVEMENT OF THE GEOTHERMAL HEAT CARRIER IN THE WELL
von: Morozov, Y., et al.
Veröffentlicht: (2022)

Molecular analysis based on surface plasmon spectroscopy for different nature thin films.
von: Kostyukevych, S. O., et al.
Veröffentlicht: (2019)

The results of the study of spatio-temporal changes in surface temperatures of Zaporizhya based on satellite data
von: Lischenko, Lyidmila, et al.
Veröffentlicht: (2021)

Optical Properties of Dye-Filled Polymer Films Deposited in Vacuum
von: Гриценко, К., et al.
Veröffentlicht: (2012)

INFLUENCE OF GROUNDWATER FILTRATION FLOW ON THE THERMAL EFFICIENCY OF UNDERGROUND HEAT EXCHANGER
von: Basok, B., et al.
Veröffentlicht: (2022)

Assessing the possibilities for improving energy efficiency of TPPs based on flue gas heat exchangers and using heat pump installations
von: Bilodid V.D.
Veröffentlicht: (2015)

Study of functioning of heat exchanger in soils with different thermal diffusivity
von: Kovyazin, О. S.
Veröffentlicht: (2018)

Improved surface plasmon resonance sensors with prism type of excitation on polymer basis
von: Kostyukevych, S. O., et al.
Veröffentlicht: (2019)

Structural and morphological properties of annealed films of the As2S3-Sb2S3-SbI3 system
von: Грещук, О. М., et al.
Veröffentlicht: (2023)

Modeling heat and mass exchange processes in metal-hydride installations
von: Chorna, N. A., et al.
Veröffentlicht: (2019)

Modeling heat and mass exchange processes in metal-hydride installations
von: Chorna, N. A., et al.
Veröffentlicht: (2019)

Heat and mass transfer in the heated from below free cylindrical elementary convection cell with a conical cavity bottom
von: Бозбей, Л. С., et al.
Veröffentlicht: (2016)

Heat and mass transfer in the heated from below free cylindrical elementary convection cell with a conical cavity bottom
von: Бозбей, Л. С., et al.
Veröffentlicht: (2016)

THE METHODICAL ASPECTS OF VALIDITY ASSESGMENT FOR HEAT-MOISTURE EXCHANGE STUDIES (AS AN EXAMPLE THE COMPLEX OF KYIV PECHERSK LAVRA)
von: Sitnikov, A.B.
Veröffentlicht: (2015)

Structure and surface morphology of mercury modified selenium thin films
von: Рубіш, В. М., et al.
Veröffentlicht: (2023)