Buchumschlag

COMPARATIVE ANALYSIS OF MODERN TECHNOLOGIES OF ADDITIVE PRODUCTION

In today's conditions, 3D printing is used to create unique models, prototypes, and equipment necessary for conducting experiments and studying various phenomena and processes, for the rapid prototyping of various parts and devices in scientific and engineering research. 3D printing technologie...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2024
Hauptverfasser:	Romanenko, Vladyslav, Nazarenko, Oleg
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	General Energy Institute of the National Academy of Sciences of Ukraine 2024
Schlagworte:	additive manufacturing 3D printing additive manufacturing technologies Fused Deposition Modeling Stereolithography Selective Laser Sintering Direct Metal Laser Sintering Digital Light Processing
Online Zugang:	https://systemre.org/index.php/journal/article/view/835
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	System Research in Energy

Institution

System Research in Energy

Ähnliche Einträge

TECHNOLOGY OF QUALITY CONTROL OF ADDITIVE PRODUCTION PRODUCTS DURING PRINTING OF ELEMENTS OF ENERGY COMPLEXES
von: Romanenko, Vladyslav
Veröffentlicht: (2024)

Технологія контролю якості виробів адитивного виробництва в ході друку елементів енергетичних комплексів
von: Romanenko, Vladyslav
Veröffentlicht: (2024)

TECHNOLOGY OF QUALITY CONTROL OF ADDITIVE MANUFACTURING PRODUCTS DURING PRINTING OF ELEMENTS OF ENERGY COMPLEXES
von: Romanenko, Vladyslav, et al.
Veröffentlicht: (2024)

Analysis of the financial risks of the Ukrainian railway transport
von: Kravchenko, O.O.
Veröffentlicht: (2017)

Industrial integrated structures as Robinson Crusoe economies
von: Cherevatskyi, D.Yu., et al.
Veröffentlicht: (2017)

LASER CAVITY WITH A GRADUALLY EXPANDING RADIATION BEAM IN THE ACTIVE MEDIUM
von: Dzyubenko, M. I., et al.
Veröffentlicht: (2023)

Additivity of elementary maps on alternative rings
von: Ferreira, Bruno
Veröffentlicht: (2019)

Direct laser writing of microrelief structures on chalcogenide glass by laser beam recorder of master discs
von: Petrov, V. V., et al.
Veröffentlicht: (2020)

An application of membrane sensors in hydrolocation systems using digital laser interferometers
von: Britsky, A. I., et al.
Veröffentlicht: (2019)

EXPERIMENTAL STUDY OF PROCESSES IN AN ATTRACTIVE-SCREEN INDUCTOR SYSTEM UNDER ADDITIONAL COIL INSERTION
von: Batygin, Yu. V., et al.
Veröffentlicht: (2014)

CALCULATION OF FIELDS AND CURRENTS IN THE INDUCTION SYSTEM WITH THE ATTRACTIVE SCREEN AND THE ADDITIONAL COIL AS A TOOL FOR THE STRAIGHTENING
von: Batygin, Yu. V., et al.
Veröffentlicht: (2015)

PROSPECTS OF THE USE OF GRADIENT GRATES IN THE LASERS OF TERAHERTZ RANGE
von: Dzyubenko, M. I., et al.
Veröffentlicht: (2018)

Identification of the movement of heavy equipment and the actions of certain types of weapons by their seismic characteristics
von: Britsky, A. I.
Veröffentlicht: (2020)

ASSESSING THE FEASIBILITY OF USING AN ADDITIONAL ENERGY SOURCE TO ENSURE THE STABLE OPERATION OF A STIRLING ENGINE
von: Golovko , V., et al.
Veröffentlicht: (2025)

Assembly methods of solving inverse problems as an integral element of additive technologies for interpretations of gravity anomalies
von: Balk, P. I., et al.
Veröffentlicht: (2019)

Conditions for effective application of passive speckle reduction methods and decoherent focusing method in laser illumination systems
von: Лапчук, А. С., et al.
Veröffentlicht: (2025)

Processing the quadrature signals of an interferometer using an Arduino microcontroller
von: Бородін, Ю. О., et al.
Veröffentlicht: (2025)

Optimization of addition to capacity depending on a capital investment in perspective collieries in action
von: Rublevsky N.T., et al.
Veröffentlicht: (2003)

The theory of reducing speckles in a laser projector with a very long multimode fiber
von: Лапчук, А. С., et al.
Veröffentlicht: (2020)

Influence of doping additive on thermophysical and rheological properties of halogen-free polymer composition for cable insulation and sheaths
von: Zolotaryov, V. M., et al.
Veröffentlicht: (2022)

The study of convergence of additive-averaged splitting based on the scheme of explicit solution for three-dimensional equations of convective diffusion
von: Katsalova, L.
Veröffentlicht: (2015)

Modified additive-averaged splitting for solving three-dimensional equations of hydrodynamics
von: Katsalova, L. N.
Veröffentlicht: (2016)

EXCITATION OF Zn ATOMS TO THE 4snf RYDBERG STATES
von: Kutsenko, A. S., et al.
Veröffentlicht: (2015)

Spread of the correlation detection method of movement for heavy objects using seismometers — velocimeters
von: Бріцький, О. І., et al.
Veröffentlicht: (2024)

TRANSMISSION OF TERAHERTZ RADIATION THROUGH ONE-DIMENSIONAL WIRE GRATINGS AT DIFFERENT ANGLES OF INCIDENCE
von: Dzyubenko, M. I., et al.
Veröffentlicht: (2020)

Modern risk assessment of the influences of natural and military man-made factors on the state of the historical buildings of the Kyiv-Pechersk Lavra
von: Kril, T.V., et al.
Veröffentlicht: (2024)

AN ANALYSIS OF THE ELECTROMAGNETIC PROCESSES IN THE INDUCTOR SYSTEM – TOOL OF THE STRAIGHTENING OF CAR BODIES
von: Batygin, Yu. V., et al.
Veröffentlicht: (2015)

ECONOMY DIGITALIZATION AS A DIGITAL TRANSFORMATION TOOL OF UKRAINE
von: Mosiichuk, Iryna, et al.
Veröffentlicht: (2020)

THE STABILITY MONITORING OF THE MANUFACTURING PROCESS OF ELECTRICAL INSULATING SYSTEMS OF TRACTION ELECTRIC MACHINES
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2017)

Additional power loss in a frequency-controlled induction motor due to voltage higher harmonics
von: Petrenko, A. N., et al.
Veröffentlicht: (2012)

EFFECT OF TEMPERATURE ON THE PROPERTIES OF A BIFACIAL TEXTURED SOLAR CELL
von: Aliev , R., et al.
Veröffentlicht: (2025)

System Records High-Density Optical Disks
von: Kosyak, I. V.
Veröffentlicht: (2012)

THERMAL SMEARING OF INFRARED PATTERN ON THE SURFACE OF A THIN FILM HTSC BOLOMETER
von: Gordiyenko, E. Yu., et al.
Veröffentlicht: (2019)

A research of typical sources of errors in the manufacture of raster optical elements by laser recording systems with circular scanning
von: Косяк, І. В.
Veröffentlicht: (2025)

Methodical provisions on the distribution of total technological energy resources between separate types of outputs of multi-product manufacture
von: Kuts G.O., et al.
Veröffentlicht: (2020)

Construction of seismic portraits of important events provided that their observation is not available
von: Бріцький , О. І.
Veröffentlicht: (2021)

MAGNETIC PULSED PROCESSING OF METALS FOR ADVANCED TECHNOLOGIES OF MODERNITY – A BRIEF REVIEW
von: Batygin, Yu. V., et al.
Veröffentlicht: (2016)

High stability temperature control of the laser diode for interferometry
von: Kosyak, I. V.
Veröffentlicht: (2016)

DYNAMIC BEHAVIOR OF PV-CELLS AND PV-PANELS UNDER PULSE COHERENT RADIATION
von: Bondarenko , D.
Veröffentlicht: (2022)

Main characteristics and perspectives of development of laser gyroscopes
von: Alpert, Sofiia
Veröffentlicht: (2021)