Рефлектометричнi дослiдження нанопористих плiвок з масивом наночастинок золота
The influence of conditions occurring at the pulsed laser deposition of films with gold nanoparticles on the film porosity has been studied, by using the X-ray reflectometry. The films of two types were obtained by depositing particles (i) from the direct high-energy flow of erosion-torch particles...
Збережено в:
| Дата: | 2018 |
|---|---|
| Автори: | , , , , , , |
| Формат: | Стаття |
| Мова: | English Ukrainian |
| Опубліковано: |
Publishing house "Academperiodika"
2018
|
| Теми: | |
| Онлайн доступ: | https://ujp.bitp.kiev.ua/index.php/ujp/article/view/2018528 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Ukrainian Journal of Physics |
Репозитарії
Ukrainian Journal of Physics| Резюме: | The influence of conditions occurring at the pulsed laser deposition of films with gold nanoparticles on the film porosity has been studied, by using the X-ray reflectometry. The films of two types were obtained by depositing particles (i) from the direct high-energy flow of erosion-torch particles and (ii) from the backward low-energy one. In both cases, the films were deposited either at the residual air pressure p = 10^−2 Pa or in the argon atmosphere with the pressures pAr = 5–100 Pa. In case (i), the film porosity was 0.1% at p = 10^−2 Pa and 1% at pAr ≤ 5 Pa. The plasmon properties of those films are associated with the propagation of surface plasmon-polariton waves. As the argon pressure grew further up to 100 Pa, the porosity increased to approximately 30%. In case (ii), the porosity of films deposited at pAr = 5–100 Pa onto substrates located in the target plane equaled 30 to 70% and depended on the distance from the film to the torch axis. All films with the porosity higher than 20% turned out nanocomposite structures with arrays of gold nanoparticles, which enabled us to observe the excitation of local surface plasmons. |
|---|