Deformation state of short-period AlGaN/GaN superlattices at different well-barrier thickness ratios
Dependence of deformation characteristics changing in superlattice (SL) structures AlxGa₁₋xN/GaN with Al (~10%) on the well-barrier thickness ratio in period was studied in this work. The deformation state of SL and individual layers, relaxation level and periods, layers’ thickness and compositio...
Збережено в:
Дата: | 2014 |
---|---|
Автори: | , , , , , , , , , |
Формат: | Стаття |
Мова: | English |
Опубліковано: |
Інститут фізики напівпровідників імені В.Є. Лашкарьова НАН України
2014
|
Назва видання: | Semiconductor Physics Quantum Electronics & Optoelectronics |
Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/118414 |
Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
Цитувати: | Deformation state of short-period AlGaN/GaN superlattices at different well-barrier thickness ratios / V.P. Kladko, N.V. Safriuk, H.V. Stanchu, A.V. Kuchuk, V.P. Melnyk, A.S. Oberemok, S.B. Kriviy, Z.V. Maksymenko, A.E. Belyaev, B.S. Yavich // Semiconductor Physics Quantum Electronics & Optoelectronics. — 2014. — Т. 17, № 4. — С. 317-324. — Бібліогр.: 26 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of UkraineРезюме: | Dependence of deformation characteristics changing in superlattice (SL)
structures AlxGa₁₋xN/GaN with Al (~10%) on the well-barrier thickness ratio in period
was studied in this work. The deformation state of SL and individual layers, relaxation
level and periods, layers’ thickness and composition of AlxGa₁₋xN layers were analyzed
using high-resolution X-ray diffractometry. It was ascertained that the buffer layer and
SL layers are compressed in all the investigated structures. Thus, it has been shown that
deformation of the SL period depends on the well/barrier thickness ratio. Thicknesses of
individual layers in SL strongly depend on the deformation state of the whole system.
Increasing the deformation level leads to the increase of the barrier layer thickness. |
---|